Kedano's thread reminded me I have an extra one I should get rid off.

This is the Lake Cities Polaris (aka Rend) plate with skegs. It came off of a '96 SL hull. I degreased and scrubbed it to get it as clean as I could. It's clean, but there's some staining from the exhaust scum that tends to accumulate on the SLs. Check out the pics.

I also too pics of the bolts holes. Some of them are a little wallowed out. I'm not sure if this was from someone fitting it on a slightly different hull or if it was ridden with the screws loose. Either way, with the tapered heads on the ride plate bolts, I don't see it being a problem. Again, check out the pics.

$70 shipped

Click image for larger version. 

Name:	IMG_1647.JPG 
Views:	17 
Size:	66.0 KB 
ID:	252892
Click image for larger version. 

Name:	IMG_1648.JPG 
Views:	16 
Size:	54.1 KB 
ID:	252893
Click image for larger version. 

Name:	IMG_1652.JPG 
Views:	19 
Size:	64.9 KB 
ID:	252891
Click image for larger version. 

Name:	IMG_1653.JPG 
Views:	17 
Size:	50.7 KB 
ID:	252894