Page 1 of 96 1 2 3 11 51 ... LastLast
Results 1 to 10 of 954
  1. #1
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471

    CMD Marine unit for the PWC market

    power commander for the pwc market

    power commander for your jet ski..
    for those of you who dont ventur to the doo side i have been building a turbo setup

    power commander makes one for a 1200 cc 4 tec..it used the same tps and is a 3 cylinder as well..so i went out on a limb and i got one..

    i needed to modify it a little buy changing the injector plugs...very simple..

    anyway it is really cool ...it has an auto tune feature..so it tunes your ski for you ...it allows you to set up a table of where you want the af to be at any given rpm and boost leve it picks up from rpm the injector pulse..and the voltage comming off the varible output from the map sensor..it wil pull up to 250% fuel so you can run those huge injectors...and add up to 100% or static open which ever comes first...and goes between the ecu and the injectors so the ecu wll not throw any codes..with the dash it will data log..so far it is woking very well...i have an issue with my map sensor not seeing over 12 psi but it brought the low in in perfect..you set your tael and go out and ride it easy ...the powercommander watches the af if it sees the af isnt what you ask it to be ant any given rpm or boost level ..it does the math and adjust the injector pulse to get it closer ..i have the max trim set at 20% at any given time ..then you go int accept the trims and go ride it somemore..until it is perfect..then you can disconnect the auto tune and you are perfect..
    if you add more mods just put the auto tune back in and it will recofigure it allowing you to get the most of you modifications...and the best fuel ecomomy possible..when you ride nice...so you no longer need to deal with bad fuel economy and poor throddle response..because you have to have the top end rightso it doesnt blow up.. the low end suffers..even with aftermarket ecu s they arnt a one tune fits all becaues every modded ski is modded differently...and we alllive in different parts of the country..

    anyway i have mine.and have no ties to dynojet..but i think it is a cool product..

    go to the dynojet site and look...and if you think it would be a good product for the pwc market..shoot this guy an nice e mail...expressing your intrests in a plug and play power commander for your ski...maybe if they see enough intrest they will make them for us...



    [email protected]


  2. #2

    Join Date
    Jul 2011
    Location
    STL, LOTO
    Posts
    150
    +1
    7
    I would buy one right now. I love my power commander on my CBR. We can use it on an 05, even though it's for an 09+ skiddoo, right?

  3. #3
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    I'm hoping we can get this to happen. I love one on my can-am renegade 800 auto tuned, and love it!! They work really well, and the software is pretty easy to work with.

    I'm ready to buy one as well

  4. #4
    dnielsen's Avatar
    Join Date
    May 2008
    Location
    Shreveport, Louisiana
    Posts
    2,018
    +1
    94
    After reading breon's other thread and this one I am definitly interested in one!

    EDIT: breon, can you post a link to the one you modified for your setup?

  5. #5
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Nice. I would be interested as well.

  6. #6
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    send the e mails

  7. #7
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    The response got last week was that they deffinately would NOT be doing anything anytime soon. Which sucks because would think it would be an easy adaption from the skidoo system they already have available to the Seadoo.

  8. #8
    oz_speed's Avatar
    Join Date
    Feb 2011
    Location
    United Kingdom
    Posts
    371
    +1
    1
    I too would buy one today, I will email them now.

    Any chance you could do a quick how to on converting the plugs tec and what you need as I think this is going to be on my winter project list.

  9. #9
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    ya they are interested but i dont think they realize how big the market would be...we need to show them how much demand there is...

    send the e mails.

  10. #10
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by breon View Post
    ya they are interested but i dont think they realize how big the market would be...we need to show them how much demand there is...

    send the e mails.
    Sent. I would like one as well.

Page 1 of 96 1 2 3 11 51 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Victory for the PWC'ers and Dismissed Charges
    By Red Devil in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 03-22-2016, 10:16 PM
  2. power commander for the pwc market
    By breon in forum Kawasaki PWC Performance (4-stroke)
    Replies: 228
    Last Post: 03-29-2013, 01:17 PM
  3. Whats a good hand held GPS unit for marine use
    By qthor242 in forum Open Discussion
    Replies: 2
    Last Post: 01-16-2008, 11:24 AM
  4. The Perfect GPS for a PWC
    By saltlifejax in forum Open Discussion
    Replies: 5
    Last Post: 09-16-2007, 02:11 PM
  5. worth a look for all the pwc owners
    By Hydrotherapy in forum Open Discussion
    Replies: 1
    Last Post: 01-23-2007, 11:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •