hi, I have been investigating a fault code "P1602 EEPROM data out of range 3/3 bytes" which the seadoo dealer discovered on my ski. He didnt know what was causing this.

I have checked all the wiring and fuses and found the 20amp "charging" fuse in the back is blown. If you put in a new fuse it blows again unless you unplug the rectifier.

I have ordered a new rectifier and am waiting for it, however even with the rectifier removed the jetski runs and i still get the MAINT and flashing red light.

Any ideas. I know the jet ski is due a service, does the MAINT and red light flash when a service is due? Obviously it is difficult to know if i have repaired the orginal fault code without the Buds system.