Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 34
  1. #1

    Join Date
    Jul 2007
    Location
    hawkesbury ontario
    Posts
    127

    2011 rxt 260 going right

    anybody get these boats to run straight?always pulling to the right


  2. #2
    JT jpt7779's Avatar
    Join Date
    Jul 2008
    Location
    Pittsburg, Texas Lake Bob Sandlin
    Posts
    3,851
    +1
    742
    Very common and very easy to fix. Raise iBr gate per Owners Manual with IBr Override procedure, use a 10mm socket and 10 mm wrench to disconnect steering linkage, add a few turns to the adjustment fitting, re-install and test. It will take all of 15 minutes to do this procedure.

  3. #3
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by jpt7779 View Post
    Very common and very easy to fix. Raise iBr gate per Owners Manual with IBr Override procedure, use a 10mm socket and 10 mm wrench to disconnect steering linkage, add a few turns to the adjustment fitting, re-install and test. It will take all of 15 minutes to do this procedure.
    +1. You also can hook it to the computer and have it calibrated as well.... I had this question answered for me this weekend from the SeaDoo guys.... CanDoo can work for this I am told.... Havn't verified this though.....

  4. #4
    www.eastcoastpwc.net Scott's Avatar
    Join Date
    Jul 2007
    Location
    NJ
    Posts
    7,992
    +1
    455
    Quote Originally Posted by MSRXP View Post
    +1. You also can hook it to the computer and have it calibrated as well.... I had this question answered for me this weekend from the SeaDoo guys.... CanDoo can work for this I am told.... Havn't verified this though.....
    Have what cailbrated? The steering?

  5. #5
    stuckmoto's Avatar
    Join Date
    Jun 2010
    Location
    Newark, De
    Posts
    1,485
    +1
    59
    My cable was too far out from the factory and had to adjust at the column - no problems now.

  6. #6
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by Scott View Post
    Have what cailbrated? The steering?
    The IBr

  7. #7
    stuckmoto's Avatar
    Join Date
    Jun 2010
    Location
    Newark, De
    Posts
    1,485
    +1
    59
    What are you calibrating it to/for? I'm confused....

  8. #8
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by stuckmoto View Post
    What are you calibrating it to/for? I'm confused....
    The IBr grate after plenty of use will lose calibration. it will drop down slightly at WOT and will also cause you to pull to the left or right. It will also not sit still in Neutral. It will either go forward or back while in neutral. It is the information I got from the SeaDoo test riders this past weekend.... They have been testing them for the past 6 years. They have been riding the px for 3 years at the test facility in FL.....

  9. #9
    Moderator boataddict's Avatar
    Join Date
    Apr 2005
    Location
    Ottawa, Ontario, Canada
    Posts
    3,822
    +1
    39
    Quote Originally Posted by MSRXP View Post
    The IBr grate after plenty of use will lose calibration. it will drop down slightly at WOT and will also cause you to pull to the left or right. It will also not sit still in Neutral. It will either go forward or back while in neutral. It is the information I got from the SeaDoo test riders this past weekend.... They have been testing them for the past 6 years. They have been riding the px for 3 years at the test facility in FL.....
    I will hook buds up on the weekend and try that.

  10. #10
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by BOATADDICT View Post
    I will hook buds up on the weekend and try that.
    Like I said, I learned it this weekend from the test pilots. i had no idea it did that. He says after a few hours and other variables, they tend to lose their calibration. I had no idea...

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2011 rxt 260 vs 2007 rxp riva stage 1
    By chokehold in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-18-2011, 03:44 PM
  2. Replies: 4
    Last Post: 07-17-2011, 12:07 PM
  3. 2011 rxt- 260 variable trim BROKE! Please help!
    By Widowmaker in forum 4-Tec Performance
    Replies: 5
    Last Post: 07-10-2011, 10:32 PM
  4. 2011 RXT 260 vs. RXT-x 260
    By DigitalCSI in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 07-05-2011, 07:05 AM
  5. Some fun w/ the new 2011 RXT-260....
    By cmgww in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 06-06-2011, 10:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •