Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Riva thru hull

  1. #1
    Melbourne (AUS) gtile04's Avatar
    Join Date
    Apr 2009
    Location
    Melbourne
    Posts
    567
    +1
    12

    Riva thru hull

    so i installed my riva thru hull exhaust on my 06 rxt, now i can seem to get this part right i got the riva thru hull kit it came with a little black cap i used this to block off the fitting from where the bottom of the j pipe you have a tee i followed the hose from the bottom of the T and it went to the back part of the ski i think its called a trasom plate i blocked of that with the black cap and used the hose for the exhaust pipe with the gold bard fitting is this correct?


  2. #2
    Melbourne (AUS) gtile04's Avatar
    Join Date
    Apr 2009
    Location
    Melbourne
    Posts
    567
    +1
    12
    anyone

  3. #3
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Yes this is correct, if you want to run the exhaust pisser on RXT. RXP is different in that this hose already goes to the oem exhaust outlet.

    Make sure that plug is real secure!

  4. #4
    NOONZ's Avatar
    Join Date
    Oct 2009
    Location
    Port Stephens, NSW, Australia
    Posts
    81
    Did you install the barb into the end of the thru hull and attach the hose?

    * Sorry sayers answered my question *

  5. #5
    Melbourne (AUS) gtile04's Avatar
    Join Date
    Apr 2009
    Location
    Melbourne
    Posts
    567
    +1
    12
    yer they gave me a black cap and a zip tie i pitched the zip tie and used a hose clamp to clamp the black cap

  6. #6
    monaroman76's Avatar
    Join Date
    Mar 2008
    Location
    Whyalla, South Australia
    Posts
    1,979
    +1
    28
    Im about to install my thru-hull, seems pretty simple but it might be a bit nerve racking drilling a hole in the hull.
    How'd you find the install?
    What is the reason for the pisser that goes into the exhaust pipe just before the outlet? Is this to suppress noise? If thats the case, can you choose not to install it?

  7. #7
    Melbourne (AUS) gtile04's Avatar
    Join Date
    Apr 2009
    Location
    Melbourne
    Posts
    567
    +1
    12
    my question is which part do i block off the t peice or the part that is on the plate at the back of the hull

  8. #8
    83.0 @ 8400 jhill19's Avatar
    Join Date
    Jul 2010
    Location
    Teays Valley, West Virginia
    Posts
    2,800
    +1
    81
    Both if you don't want to run the pisser

  9. #9
    MSRXP's Avatar
    Join Date
    Sep 2010
    Location
    Central MS
    Posts
    5,448
    +1
    7
    Quote Originally Posted by monaroman76 View Post
    Im about to install my thru-hull, seems pretty simple but it might be a bit nerve racking drilling a hole in the hull.
    How'd you find the install?
    What is the reason for the pisser that goes into the exhaust pipe just before the outlet? Is this to suppress noise? If thats the case, can you choose not to install it?
    Yes, it is to suppress the noise. The install isn't too bad. Fairly simple. The hardest part is ensuring the hole is drilled at 90 degrees....

  10. #10
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by gtile04 View Post
    my question is which part do i block off the t peice or the part that is on the plate at the back of the hull
    Block off the fitting at the transome if you want to run the pisser. If you dont want to run the pisser leave that hose alone and blick off the nipple on the riva pipe.

    Quote Originally Posted by jhill19 View Post
    Both if you don't want to run the pisser
    RXP and RXT differ, you dont need to block off the hose just leave it as OEM.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Riva thru hull transparent/translucent?
    By Pale Rider in forum 4-Tec Performance
    Replies: 8
    Last Post: 03-06-2006, 04:34 PM
  2. PPG resonated powerpipe or Riva thru-hull exhaust???
    By GPR/STX-15F/RXT in forum 4-Tec Performance
    Replies: 15
    Last Post: 02-27-2006, 07:51 AM
  3. Riva thru hull exhaust---2 7/8 Hole saw ---- Loctite 5910
    By RXPDAVID in forum 4-Tec Performance
    Replies: 4
    Last Post: 08-03-2005, 05:05 PM
  4. Riva thru hull exhaust / PPG power pipe
    By RXPDAVID in forum 4-Tec Performance
    Replies: 5
    Last Post: 07-10-2005, 11:19 AM
  5. Riva Thru Hull Exhaust ** VIDEO ATTACHED**
    By Green Hulk in forum 4-Tec Performance
    Replies: 46
    Last Post: 06-30-2005, 10:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •