Thread: gharger ?
10-06-2011, 08:42 PM #1
i have a x charger in a 06 215, can i have a increce boost by going to a rude 2 or a riva xx. with the wheel only, ? with 50# injectors rear inner cooler thru hull smoke pipe ajustable fuel pressure up 97 lbs do i still need all that ecu stuf for say 8150 to 8180 rpm thanks
10-06-2011, 08:50 PM #2
No 2-Rude is an 140mm wheel your X is a 137mm Wheel.
10-06-2011, 09:04 PM #3
are thier any outher wheels that i can stuf in the x houseing to gain some boost, also thought about the ecu stuf
10-06-2011, 09:24 PM #4
ET137 Drop in. 13.5 lbs.....@8100....up from 10.5 on the x
10-06-2011, 09:28 PM #5
ok where would i buy one ,
10-06-2011, 09:41 PM #6
is it drop in or need mill work
10-06-2011, 09:42 PM #7
10-06-2011, 09:47 PM #8
Call Art tomorrow at 905-478-5084 He will get you taken care of. It will ship out tomorrow if you call him in the morning. Shipping is around $26.50. It is what I paid. I had it shipped to Jerry for install at MB last week. I absolutely love it. Stay with the 42lb injectors. Base pressure should be around 62-63 psi. Each ski is different. I went 81.1 with it last week at MB and that was with an 83mm OEM nozzle.
http://www.engine-tech.com/shop/articles.php?tPath=8 Kit #1.
10-06-2011, 09:55 PM #9
ok thanks for the tip, so i would be safe , whith out adding the ecu up grade, 42inj-x charger- shorty box through hull after market inner cooler- trimd j pipe opus buy buy trimed bucket- 3 skigges 15-20 plus 2up ajustable fuel pressure up to 97 psi running 72 psi reva grate sanded bottem holes plugged out the rear air intake ground pump shue to match prop houseing, 160 degre thurm 20% taululine to gas
10-06-2011, 10:10 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By twisted shaft in forum Sea Doo ClassifiedsReplies: 0Last Post: 10-04-2011, 08:40 PM