Results 1 to 3 of 3
  1. #1

    Join Date
    Feb 2006
    Location
    Birmingham AL
    Posts
    2,924
    +1
    2

    VTS switch question

    Does anyone know what color the switch is for the VTS system inside the handlebar mount?


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Scott, i assume you are trying to figure out how to make the Sea Doo VTS work with your GPRXP project?

    With the Rotax Racing EMS i had to manually wire up my VTS system. Maybe the below info will help you?

    The VTS switch has 3 wires.

    The blue/white wire controls UP
    The green/white wire controls DOWN
    The black wire is a ground.

    Its actually very easy to wire up.

    The blue/white & green/white from the switch connect to the same colored wires coming from the VTS motor.

    The black wire goes to ground.

    You also have a connector coming from the VTS motor with a red and black wire. The black wire goes to ground. The red wire goes to (+) constant on. You will want to fuse this red wire with a 7.5 amp fuse.

    There is a purple wire that comes from the VTS motor. This wire will be connected to (+) source which is switched on/off with the lanyard.

    This leaves 2 remaining wires coming from the VTS motor. A brown wire and a brown/striped wire. These are the gauge signal wires.

  3. #3

    Join Date
    Feb 2006
    Location
    Birmingham AL
    Posts
    2,924
    +1
    2
    Thanks thats what I was looking for kinda.... I wanted to make sure I was not using the VTS switch for the Mode/Set function. I am not using the VTS at all I am using the Yamaha trim system but thanks for the help

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Confused with vts switch wiring.
    By aussie rxp in forum 4-Tec Performance
    Replies: 3
    Last Post: 03-22-2009, 07:26 AM
  2. WTB: RXP VTS switch
    By Gus13letter in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 09-18-2008, 01:39 PM
  3. WTB: UMI start/stop, VTS switch housing
    By mxl16 in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 07-23-2008, 04:30 PM
  4. Simple VTS boot question..
    By Mikey G. in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-22-2008, 02:41 AM
  5. VTS Motor question...
    By 1996XP in forum 2-Stroke Performance
    Replies: 5
    Last Post: 06-08-2008, 08:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •