Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58

    GPR Nozzle with rings


    Guys,

    Iím trying to find an adjustable nozzle for the GPR with rings. Iím tired of swapping nozzles and storing 4 of them, they take up too much room. Any hints where to get one? I read about skat having one, but I heard itís very expensive. I just wanted to get some info if possible.
    Thanks


  2. #2

    Join Date
    Feb 2006
    Location
    Birmingham AL
    Posts
    2,924
    +1
    2
    I have no idea if this will work but what about taking the adjustable rings from a RXP and have a nozzle machined to accept them?

  3. #3
    ecpChris's Avatar
    Join Date
    Jul 2007
    Location
    ocean county nj
    Posts
    2,912
    +1
    427
    Quote Originally Posted by Lvnspeed View Post
    I have no idea if this will work but what about taking the adjustable rings from a RXP and have a nozzle machined to accept them?
    That will work. I used to have an FZR nozzle and machined it to run skat rings in it.

  4. #4
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58
    Good idea, but wouldn't this work: http://www.4-tecperformance.com/inde...oducts_id=1199

    it's expensive, but by the time I sell off the 5 nozzles I have, it might be a wash...

  5. #5
    ecpChris's Avatar
    Join Date
    Jul 2007
    Location
    ocean county nj
    Posts
    2,912
    +1
    427
    Quote Originally Posted by rangermtb5 View Post
    Good idea, but wouldn't this work: http://www.4-tecperformance.com/inde...oducts_id=1199

    it's expensive, but by the time I sell off the 5 nozzles I have, it might be a wash...
    yes sir, same concept but that is a little more expensive

  6. #6

  7. #7
    Eastside Powersports Slow 91's Avatar
    Join Date
    Sep 2008
    Location
    River Crew CT
    Posts
    4,248
    +1
    544
    Mike, if you get the riva rings for an rxp i can machine your nozzle for them.

  8. #8
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58
    Quote Originally Posted by beerdart View Post
    PM sent!

    Quote Originally Posted by Slow 91 View Post
    Mike, if you get the riva rings for an rxp i can machine your nozzle for them.
    Thanks man, I'll let you know!

  9. #9
    800AMSOIL4U's Avatar
    Join Date
    Aug 2006
    Location
    Morgan Hill, CA
    Posts
    5,024
    +1
    132
    Water woody might want one depending on what mm it is if u sell one.

  10. #10
    rangermtb5's Avatar
    Join Date
    Apr 2008
    Location
    North Jersey
    Posts
    4,473
    +1
    58
    Quote Originally Posted by 800AMSOIL4U View Post
    Water woody might want one depending on what mm it is if u sell one.
    thanks, i sent him a PM earlier, I saw his thread.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Riva Reduction Nozzle with Rings
    By Slow 91 in forum Sea Doo Classifieds
    Replies: 4
    Last Post: 01-31-2013, 09:55 AM
  2. FS GPR/XLT Reduction Nozzle with ring's
    By Luis Marine in forum Yamaha Classifieds
    Replies: 0
    Last Post: 04-08-2010, 07:20 PM
  3. FS Riva pro series reduction nozzle with rings
    By RXPT400 in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 01-29-2010, 11:17 PM
  4. XLT 5degree 87mm GPR Nozzle with Jim's plate
    By cmherrera in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-29-2008, 05:39 PM
  5. Where to buy a reduction nozzle with rings
    By Hecyan in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-12-2006, 01:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •