10-13-2011, 11:56 PM #1
2x Siliconeintakes Reducer Coupler, 3.0" to 2.5" - Blue
Selling two brand new 2x Silicone Reducer, 3.0" to 2.5" - Blue I just realized i needed 2.75''
selling as a pair for $27 shipped.
Silicone Reducer, 3.0" to 2.5" - Blue
Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
These silicone parts can be used in trucks, recreational vehicles, boats, or anything else with an engine.
Please note the following when you order silicone parts online. Some vendors have started counting the layers of silicone instead of the layers of reinforcement when talking about the ply. For example, a 3-ply reducer has four layers of silicone plus three layers of reinforcement fabric. Some vendors might incorrectly call this a 4-ply reducer because of the four layers of silicone. All of our silicone parts are now of Genuine 4-Ply construction - that's 5 layers of silicone plus 4 layers of reinforcement for 9 total layers!
Genuine 4-ply Silicone (5 silicone layers plus 4 reinforcement layers = 9 total layers!)
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm - 5 mm
10-18-2011, 09:16 PM #2
10-27-2011, 09:45 PM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GTA17 in forum General ClassifiedsReplies: 1Last Post: 03-28-2012, 06:24 AM
By boostaholic in forum Sea Doo ClassifiedsReplies: 0Last Post: 03-15-2010, 02:37 AM
By mrbtd in forum Sea Doo ClassifiedsReplies: 7Last Post: 05-13-2009, 07:31 AM
By lextoy in forum Sea Doo ClassifiedsReplies: 3Last Post: 10-26-2008, 06:57 PM
By boostaholic in forum Yamaha ClassifiedsReplies: 2Last Post: 07-21-2008, 09:28 PM