Results 1 to 1 of 1
  1. #1
    ADAMBOMB's Avatar
    Join Date
    Mar 2006

    2x Siliconeintakes Reducer Coupler, 3.0" to 2.5" - Blue

    2x Siliconeintakes Reducer Coupler, 3.0" to 2.5" - Blue
    Selling two brand new 2x Silicone Reducer, 3.0" to 2.5" - Blue I just realized i needed 2.75''

    selling as a pair for $27 shipped.

    Silicone Reducer, 3.0" to 2.5" - Blue


    Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.

    Custom compressor, intercooler or inlet piping for turbo/supercharged car

    Custom cold air intake for nonturbo car

    Replacement of all factory rubber parts

    These silicone parts can be used in trucks, recreational vehicles, boats, or anything else with an engine.

    Please note the following when you order silicone parts online. Some vendors have started counting the layers of silicone instead of the layers of reinforcement when talking about the ply. For example, a 3-ply reducer has four layers of silicone plus three layers of reinforcement fabric. Some vendors might incorrectly call this a 4-ply reducer because of the four layers of silicone. All of our silicone parts are now of Genuine 4-Ply construction - that's 5 layers of silicone plus 4 layers of reinforcement for 9 total layers!

    Genuine 4-ply Silicone (5 silicone layers plus 4 reinforcement layers = 9 total layers!)
    Installer can cut silicone parts down to fit with a razor
    Heat tolerance: -40° to 392° Fahrenheit
    Burst Pressure: 200 PSI
    Working Pressure: 50 PSI
    Wall Size: 4 mm - 5 mm
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	reducer_blue_picture.jpg 
Views:	36 
Size:	44.8 KB 
ID:	256320  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 5
    Last Post: 01-28-2016, 12:13 AM
  2. FS - Parts RIVA FF exhaust 250/260/300 with additional reduce coupler..never used..
    By jetdave56 in forum Kawasaki Classifieds
    Replies: 1
    Last Post: 02-28-2013, 08:12 AM
  3. GP1200R. Slight throw on coupler shaft that connects to engine??
    By Cameron-Sangan in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 02-01-2013, 04:24 AM
  4. FS 2x Siliconeintakes Reducer Coupler, 3.0" to 2.5" - Blue
    By ADAMBOMB in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 10-27-2011, 09:45 PM
  5. What happened to the quotes?
    By 11 in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 01-09-2006, 10:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts