Results 1 to 7 of 7
  1. #1

    T3 Technology Epoxy Resin Systems by Trinity Composites

    T3 Technology Epoxy Resin Systems

    Trinity Composites is now offering its watercraft resin system T3 High Modulus Epoxy Resin. T3 High modulus was developed 5 years ago for the construction of our watercraft hulls and components. We are now offering it to the general public. This system is a high performance Epoxy that will out perform any "general purpose" epoxy resin available at the local stores or boat shops. This material was developed through extensive composite knowledge and by an exceptional resin chemist. I recommend it for the use of: hull manufacturing, custom projects/modifications, or repair in the marine industry or any other industry that requires great strength and impact resistances.

    Product and pricing can be viewed at For larger volumes or dealer distribution info contact Trinity Composites

    Click image for larger version. 

Name:	Picture023.jpg 
Views:	191 
Size:	59.1 KB 
ID:	256451

  2. #2
    is it smc compatible?

  3. #3
    Yes it is compatible with smc. The surface needs to be clean from contaminates (oil,water,dirt,etc). Prep with a good etch of 60-80 grit sandpaper and resin is ready to be applied. It is required to use fiberglass cloths or tapes for repairs or modifications. It will not work with chop mats which has a chemical binder to hold the fibers together that is than melted by the styrene in poly and vinyl ester resin.

  4. #4
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    So will this work for yamaha nano-x-cell hulls?

  5. #5
    Great day visiting NASA as a vendor discussing future prototyping composite components for Lunar Vehicle Surface Systems. Along with the first major agency to put T3 technology resin system to use for their composite needs.

  6. #6

    Join Date
    Jan 2012
    Homer, AK, D.F., MEX., Now San Antonio, TX

  7. #7
    Banned User
    Join Date
    Jan 2009
    What's the solids content. And VOC

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. t3 and s3 hull tunnel pressure relief system by stsperformance
    By STSPERFORMANCE in forum 4-Tec Performance
    Replies: 4
    Last Post: 09-30-2012, 04:26 PM
  2. epoxy resins
    By tysonfzr in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 03-12-2011, 11:17 PM
  3. Trinity Composites Epic X-2 GP
    By Trinity Composites in forum Open Discussion
    Replies: 4
    Last Post: 07-11-2010, 10:17 PM
  4. G/Flex 650 Epoxy Resin??
    By Surf Junkie in forum Yamaha How To & FAQs
    Replies: 0
    Last Post: 09-05-2009, 05:07 PM
  5. epoxy this correct?
    By slowimport in forum Yamaha How To & FAQs
    Replies: 2
    Last Post: 04-30-2009, 10:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts