Results 1 to 8 of 8
  1. #1

    Join Date
    Jul 2006
    Location
    Cayman Islands
    Posts
    45

    Angry 06/gp1300r Issue

    Stage 2 GPR w/modified stock head, lots of detonation and pulls back at Mid and high range. Bike is 7 months old. Doing less than stock speed (35hrs)/7100 RPM's
    RIVA EFI
    RIVA Power Plemium Race File
    3 Degree Key
    RIVA D-Plate
    RIVA Reed Stuffers
    RIVA Free Flow
    RIVA Ride Plate
    RIVA 1200 2-bar Intake Grate
    Stock Head Milled (150 PSI Across the board)
    RIVA Trim Tabs
    RIVA Pump Seal
    14/20
    Jetworks

    Seams to me like its not getting enought fuel but even when I set it to run extra rich (I can smell the fuel) it does the same thing. Sounds like it is missing all the time. Any suggestions?
    Last edited by Islandgirl; 01-02-2007 at 02:36 PM.


  2. #2
    My son (mohawk man) jeffsntx's Avatar
    Join Date
    Sep 2006
    Location
    Belton TX
    Posts
    2,598
    +1
    1
    Are the RPM's you are giving off of a Tiny-Tach or the stock display?
    What octane fuel?

  3. #3
    My son (mohawk man) jeffsntx's Avatar
    Join Date
    Sep 2006
    Location
    Belton TX
    Posts
    2,598
    +1
    1
    And I would have to assume that you have some sort of EFI controller??
    What are the settings??

  4. #4

    Join Date
    Jul 2006
    Location
    Cayman Islands
    Posts
    45
    Quote Originally Posted by jeffsntx View Post
    And I would have to assume that you have some sort of EFI controller??
    What are the settings??
    EFI 3.3.5.5.2
    Tiny Tach
    100 Octane

  5. #5
    MR. SCOVILLE UNIT SUCKMYWAKE's Avatar
    Join Date
    Aug 2005
    Location
    ASTON, PENNSYLVANIA
    Posts
    2,836
    +1
    8
    settings seem way off to me

  6. #6
    steach's Avatar
    Join Date
    Dec 2005
    Location
    Rock Tavern, NY
    Posts
    3,174
    +1
    174
    Have you changed the pluggs? If you can smell unburt fuel with those efi settings I would think that one cylinder is not firing.

  7. #7

    Join Date
    Nov 2005
    Location
    Charleston, SC
    Posts
    374
    you have too many numbers on that efi controller. lol
    idle around 2 or 3 (first dip switch)
    acc around 4 or 5 (2ND) if it gurgles add more fuel
    Main around 1 to 3 (3rd)
    RPM is around 6 to 8 (4th) you need to set this one as you ride, you want the red light to come on around 6500 to 7000. once you set the rpm go back to the 3rd switch and tweek it.
    Also 100 octane is too much for 150 psi, 93 is all you need. If that is airplane fuel, don't use it. That rating is for 10,000 feet and can hurt you engine
    Mike

  8. #8
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    go 3-4-3-7 on efi and if you have the cat chip take it out and just plug the sensor back. The 06 does not like the chip installed.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 06 RXP vs 06 GP1300R ?
    By NeverEndn in forum 4-Tec Performance
    Replies: 27
    Last Post: 02-18-2008, 05:21 PM
  2. 06 GP1300R how fast?
    By AaronC in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 08-26-2006, 02:54 AM
  3. 1st of many questions 06 GP1300R
    By Slayer in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 08-24-2006, 12:20 AM
  4. GPS's an 06 GP1300R, is this a good number?
    By NeverEndn in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 08-21-2006, 04:42 PM
  5. 06 GP1300R Compression 130psi ?
    By Johnjet in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 01-22-2006, 10:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •