Results 1 to 5 of 5
  1. #1

    Join Date
    Apr 2006
    Location
    Santa Monica
    Posts
    45

    Cooling system vent hose?

    What the hell is Riva talking about. Step #10 on the intake instructions(RS13050-06). Looks like a crankcase vent to me but what do I know? I used the Riva's supplied hose and cut the stock one to fit it to the intake. TOPS to intake.



  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Step #10 on the intake instructions(RS13050-06).
    That step is for an 06 model. TOPS is on the back of the engine on those models.

  3. #3

    Join Date
    Apr 2006
    Location
    Santa Monica
    Posts
    45
    So I hooked it up correctly?
    Thanks again.

  4. #4
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Yes, but my first choice would be to plug the port going into the air intake tube and run a catch can.

  5. #5

    Join Date
    Apr 2006
    Location
    Santa Monica
    Posts
    45
    I will do that later after I get some other things out of the way.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Overheating 3D- Cooling System - Anti-Rollover Bypass Hose
    By RedRockSA in forum Sea Doo How To & FAQs
    Replies: 1
    Last Post: 05-23-2016, 06:50 AM
  2. Replies: 2
    Last Post: 03-07-2016, 08:13 PM
  3. 2002 XP, where does the "cooling system drain hose" go.
    By thetolleyman in forum 2-Stroke Performance
    Replies: 6
    Last Post: 07-05-2013, 04:20 PM
  4. Replies: 1
    Last Post: 10-09-2012, 07:03 AM
  5. Fuel in Cooling Vent Hose...
    By 05RXPnoob in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-05-2005, 12:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •