Thread: Stage III SC Install Tools
01-03-2007, 04:38 PM #1
Stage III SC Install Tools
I want to install the S3 SC imp and housing along with an 06' spec shaft and metal washers. Which tools would be crucial or recommended with this install.
01-03-2007, 04:59 PM #2
Torx socket set
Bearing pusher tool
4 Pin Socket
Gear holding tool
You will also need a high quality torque wrench
Last edited by Green Hulk; 01-03-2007 at 05:02 PM.
01-03-2007, 05:06 PM #3
So I would definitely need to buy all of the above?
01-03-2007, 05:18 PM #4
01-03-2007, 05:32 PM #5
If you want to rebuild your SC with an 06 spec update kit you will need all the tools.
The 4 pin socket removes the seal at the front of the SC.
01-03-2007, 06:12 PM #6
also need the torx tool for the bolt in the back of the s/c its t 8
01-03-2007, 07:16 PM #7
you can use a 1/4" box end wrench for that top bolt.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RYAN17 in forum 4-Tec PerformanceReplies: 8Last Post: 08-26-2008, 02:18 PM
By Lvnspeed in forum 4-Tec PerformanceReplies: 29Last Post: 12-21-2006, 07:55 PM
By RXDI2 in forum 4-Tec PerformanceReplies: 16Last Post: 06-29-2006, 06:42 PM
By 1 FAST VE in forum Sea Doo Open DiscussionReplies: 8Last Post: 06-14-2006, 08:48 AM
By Hecyan in forum 4-Tec PerformanceReplies: 19Last Post: 06-08-2006, 01:05 PM