Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Gold charger

  1. #1
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63

    Unhappy Gold charger

    Maybe some help, please, I bought a new x charger, bought a new et 137 gold wheel , for a 06 rxt, when I gas it , it at a bout 60mph makes a blow off sound, and will not take anny gas till I let off then throttle up till it hits 60' or if I gas it hard takes off good for about 100feet sounds like impeller slip, I've got 60 ft lbs on the charger clutch nut , 42 injectors, any thoughts, thanks


  2. #2
    ADAMBOMB's Avatar
    Join Date
    Mar 2006
    Location
    Sunrise,Florida
    Posts
    4,723
    +1
    196
    Did you check all your couplers and clamps. if you arent running a BOV and it sounds like that. Its quite possible you have a boost leak.

  3. #3
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63
    Yes, can the charger wheel slip on the shaft, theirs no key way

  4. #4
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    You put 60 ft lbs on the SCer impeller nut? Should have been 22 ft lbs. You also need to up the slip when going to a bigger SCer wheel. Usually a set of McMaster spring washers does the trick. Also, you will need to check the slip every few hours, 2 to 3 times then you should be good to go.

  5. #5
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Also, I bet your lean. Need to check your AFRs, too.

  6. #6
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63
    I know the York, just trying to stop the slip, if that's the problem, it sucks I trailers 4 skis from kc to englewood fl to play , and top of that I think the pro shaft is leaking, its filling with water, when I lift it out water poors out the prop shaft , plus one of the oster bars ripped off the great, I love fl.

  7. #7
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Quote Originally Posted by jp1300r View Post
    You put 60 ft lbs on the SCer impeller nut? Should have been 22 ft lbs.
    +1....

    Quote Originally Posted by twisted shaft View Post
    I know the York, just trying to stop the slip, if that's the problem,.
    That jam nut on the Scer does not have anything to do with the slip..you can tighten it to 100 FT lbs and it will not change the slip at all....Loosen that nut and re-torque it to 22 ft lbs.....The only way you can adjust slip is to change or alter the spring washers...

  8. #8
    Mtuned's Avatar
    Join Date
    Aug 2010
    Location
    Orlando FL
    Posts
    724
    Are you still in florida?

  9. #9
    Quote Originally Posted by twisted shaft View Post
    Maybe some help, please, I bought a new x charger, bought a new et 137 gold wheel , for a 06 rxt, when I gas it , it at a bout 60mph makes a blow off sound, and will not take anny gas till I let off then throttle up till it hits 60' or if I gas it hard takes off good for about 100feet sounds like impeller slip, I've got 60 ft lbs on the charger clutch nut , 42 injectors, any thoughts, thanks
    If you got 60 ft lbs on the supercharger shaft replace it before it breaks, the shaft is now over stretched and it can break anytime.

  10. #10
    twisted shaft's Avatar
    Join Date
    Oct 2006
    Location
    Louisburg, KS-Lake of the Ozarks, MO.
    Posts
    63
    Ok I changed out to my spair charger with a green wheel all worked fine, I've never changed a prop shaft seal or boot taking to action jet ski in vin ice fl, wants 300,00 for the parts and work, leaks prety bad, road from engelwood to vin ice cut road out side, to boca grand to vin ice , back to stump pass, to engelwood I think 145 miles, 4 miles per gal, did I say aim 61years old

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 20 hour 06 rxp charger with gold washers
    By sucks2bu in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 10-28-2016, 12:59 PM
  2. '06 RXP/T Gold color
    By RustySeaRustyDoo in forum 4-Tec Performance
    Replies: 2
    Last Post: 10-12-2005, 08:48 PM
  3. Charger Torque Specs Help
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-30-2005, 04:51 PM
  4. Removing Super Charger
    By wwalker in forum 4-Tec Performance
    Replies: 9
    Last Post: 07-06-2005, 01:36 PM
  5. Frustrated With Super Charger
    By Cutter in forum 4-Tec Performance
    Replies: 66
    Last Post: 07-01-2005, 12:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •