Thread: gauge/meter for 04 STX 12f
11-23-2011, 09:06 AM #1
- Join Date
- Jul 2007
gauge/meter for 04 STX 12f
The gauge/meter set for my 04 Kawi 12f is bad (works most of time, until it gets wet).. Part number for a new one is 25031-3736. I see on ebay a person who has one for an 01 STX-1100 DI with part number 25031-3713.
They look the same.. question is.. will the other one (25031-3713) work with the 04?? I am guessing not...
11-24-2011, 12:12 AM #2
The part number for your 'Ski has been superceded by 25031-3753, which was used on the '04 STX 15F. Don't know if it will work or not. There are a couple of different display layouts. Make sure the plugs on the wires match yours before you try it. The worst that could happen is that it doesn't work and you could re-sell it on Ebay. (Got my info from the parts lookup on PowersEdge).
You might get more life from your old gauge by drying it thoroughly with a hair dryer, then re-seal the rubber plug on the back with 3M 5200 sealant. Since it's already had moisture inside, I can guarantee that it's got some corrosion, but you might get a little more use out of it.
11-28-2011, 04:02 PM #3
No, it won't work on your 4-stroke 12F.
They onlyu look a like. The connectors won't even fit.
The 2001 is for DI 2-stroke only.
What you need is a meter from any model year 12F or 15F (2003 and later).
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By TDSRacing in forum Kawasaki ClassifiedsReplies: 71Last Post: 03-13-2014, 01:33 PM
By JeffSki in forum Yamaha ClassifiedsReplies: 3Last Post: 10-19-2011, 09:34 PM
WTB 07 meter stx-12fBy ctct2118 in forum Kawasaki ClassifiedsReplies: 0Last Post: 11-08-2010, 06:29 PM
By Isopropyl in forum Kawasaki PWC Performance (4-stroke)Replies: 9Last Post: 10-11-2009, 09:48 PM
By Isopropyl in forum Kawasaki Open DiscussionReplies: 1Last Post: 07-25-2009, 07:18 PM