First of all want to say hi to all. I have a 2007 seadoo speedster with supercharged 4 tec. I heard a buzzing noise from engine when key was installed and then no power at all when the key is put on. I checked engine room fuse panel and there is power to panel but no power at any fuses on either side of the fuse. Engine cranks if I jump solenoid but wont fire. Is the fuse panel in the engine room considered the MPEM. And if it is bad when a new one is installed does it need to be programed by a dealer. There is not a dealer arond for 100 miles from my location so any info would be great. Thanks