Thread: Possibilities of Motec.
12-18-2011, 04:39 PM #1
Possibilities of Motec.
Tell please, Dear participants of a forum. The huge desire will buy Motec. If to establish it on RXT X 255, 30-50 horsepowers automatically will really be added? Or it is necessary to adjust?
12-18-2011, 07:34 PM #2
I attach results from our dyno
If you tell me your exact modifications I can supply you a MAP that will come close to these results.
You will need to run 98octane fuel or better if possible
You will need bigger injectors or at least fuel pressure regulator to run 5 Bar Fuel pressure.
You will need springs and retainers for the engine, you may need to change the prop
12-19-2011, 08:23 AM #3
Good afternoon. I have two skis GTX of 2004 185 horses and RXP X 255 on it установленн XX Supercharger and is et 137 charger and 68-140
What it is better? I do not want to change much in the engine. Advise the most optimum! What exactly else to me will need to be bought? If that is possible give me a photo and the prices that I saw that to me нужно.на both skis I want to buy мотес. Yours faithfully.
12-19-2011, 08:27 AM #4
How I have understood, it is necessary to change springs, retainers and impeller ?
12-20-2011, 10:04 PM #5
12-24-2011, 08:52 AM #6
MoTeC Pete will you please talk to me please. It is very important for me!
12-31-2011, 03:40 PM #7
To get good power from seadoo the engine must rev higher than 8000
The engine makes more boost when RPM goes up, this is good
But stock valve springs and retainers are too heavy for RPM greater than 8300 so if you want to run more RPM then you must change the springs and retainers first.
You then fit the MoTeC and any other mods that you want
Then tune engine to find out what the RPM is, if it is too low then you change the impeller to make RPM higher.
01-01-2012, 12:28 AM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By FZR AD in forum Yamaha ECU SupportReplies: 5Last Post: 08-10-2011, 04:45 PM
WTB motecBy CARLIBIRY PRODUCTION in forum Sea Doo ClassifiedsReplies: 0Last Post: 04-20-2010, 10:09 PM
By rior1 in forum 4-Tec PerformanceReplies: 2Last Post: 09-18-2007, 04:20 PM
By jgustman in forum Sea Doo Open DiscussionReplies: 10Last Post: 06-24-2007, 12:15 PM