Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    Adam's Avatar
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    275
    +1
    12

    Inducer impeller.

    Ive been looking at the new Skat trak inducer impeller and since there is no way they will be available for old school GP1200's here is what I have done. Have not tried it yet but it should work, the idea is that it makes the pump process the water more efficiently. I used an old XO solas impeller for the inducer and will join it to a Skat trak 15/20 swirl impeller I had not being used.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMAG0822.jpg 
Views:	108 
Size:	60.6 KB 
ID:	260833   Click image for larger version. 

Name:	IMAG0823.jpg 
Views:	91 
Size:	39.2 KB 
ID:	260834  


  2. #2
    old school big raider's Avatar
    Join Date
    Sep 2006
    Location
    dallas,tx
    Posts
    1,423
    interesting how are you fitting the 2 props into a wear ring? i put a 14/20 dynafly from an 04 gp 1300r in my raider-had to send it off to skat trak to weld an insert to fit the driveshaft but gained very little in performance - good luck keep us posted

  3. #3
    Adam's Avatar
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    275
    +1
    12
    I will be testing it on newyears day, I will keep you posted. The front impeller is smaller than the main one and just clears the tunnel housing.

  4. #4

    Join Date
    Aug 2009
    Location
    LI, NY
    Posts
    344
    +1
    3
    Quote Originally Posted by Adam View Post
    I will be testing it on newyears day, I will keep you posted. The front impeller is smaller than the main one and just clears the tunnel housing.
    So what kind of results bro?

  5. #5
    Adam's Avatar
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    275
    +1
    12
    Well it loaded the pump so much ,it would not pull over 5000rpms! This impeller could only work on a boat with lots of power. Thats probably why only the highly modded FZR's with lots of boost can use them. It was worth a try !

  6. #6

    Join Date
    Aug 2009
    Location
    LI, NY
    Posts
    344
    +1
    3
    Quote Originally Posted by Adam View Post
    Well it loaded the pump so much ,it would not pull over 5000rpms! This impeller could only work on a boat with lots of power. Thats probably why only the highly modded FZR's with lots of boost can use them. It was worth a try !
    Good to know, thanks for the info.

  7. #7

    Join Date
    Aug 2009
    Location
    LI, NY
    Posts
    344
    +1
    3
    Quote Originally Posted by Adam View Post
    Well it loaded the pump so much ,it would not pull over 5000rpms! This impeller could only work on a boat with lots of power. Thats probably why only the highly modded FZR's with lots of boost can use them. It was worth a try !
    Just have to put a supercharger on that 2smoke. LOL

  8. #8
    Adam's Avatar
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    275
    +1
    12
    Update , I will have to try again as I was running with 75psi in number one cylinder !
    Fixed the piston ring and in the process of rebuilding the engine , thought I had a rich fuel problem , stupid me for not checking the basics first.

  9. #9

    Join Date
    Aug 2009
    Location
    LI, NY
    Posts
    344
    +1
    3
    Cool, lets us know the results.

  10. #10
    Adam's Avatar
    Join Date
    Aug 2005
    Location
    Australia
    Posts
    275
    +1
    12
    My my engine will pull the enducer impeller, rough water hook up is good . Triple pipes would be the best setup , im not a big fan of checking the pipes every few minutes. so raider pipe is the current option.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What pitch impeller
    By Turbo Todd in forum 4-Tec Performance
    Replies: 10
    Last Post: 11-21-2008, 10:55 AM
  2. which compressor impeller ?
    By eyaliz in forum 4-Tec Performance
    Replies: 8
    Last Post: 05-12-2005, 09:21 AM
  3. Supercharger Impeller Install
    By Teflon in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-09-2005, 06:01 PM
  4. Replies: 3
    Last Post: 05-06-2005, 02:01 PM
  5. SC impeller
    By shhr in forum 4-Tec Performance
    Replies: 14
    Last Post: 05-02-2005, 09:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •