Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Work Prop?

  1. #1

    Join Date
    Dec 2011
    Location
    Orlando
    Posts
    21

    Work Prop?

    What would be the best impeller to get for pulling? I would like something to deliver more pulling power rather than top speed.

    Or, a good way to re-pitch current prop?


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    What ski do you have?
    Any modifications on the ski?

  3. #3

    Join Date
    Dec 2011
    Location
    Orlando
    Posts
    21
    Quote Originally Posted by Green Hulk View Post
    What ski do you have?
    Any modifications on the ski?
    It is an 05 RXP with x charger and 42# injectors. At WOT without pulling, it will hit 8000rpm, but if I pull skiierS it will only get to 6500. I would rather have a better suited impeller that will rev higher under load I dont care about losing top speed so much...

  4. #4
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by boostedz06 View Post
    It is an 05 RXP with x charger and 42# injectors. At WOT without pulling, it will hit 8000rpm, but if I pull skiierS it will only get to 6500. I would rather have a better suited impeller that will rev higher under load I dont care about losing top speed so much...
    It sounds like your ski is having issues. It should be slamming the rev limiter with those mods and a stock prop.
    Change your spark plugs first!

    This is the impeller you need to be running on your ski (greenhulk coupon code will save you 10%)
    http://www.4-tecperformance.com/inde...products_id=12

  5. #5
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Does he have an external or internal ICer??what prop is now in the ski???When is the last time the Scer health/slip has been checked???When was the last time the wear ring has been checked/replaced???How about plugs???Gas???Like Jerry said,there is more to this than just the prop,you have another issue somewhere we need to fix first..a bone stock RXP should pull a skier no problem...

  6. #6
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    Quote Originally Posted by Green Hulk View Post
    It sounds like your ski is having issues. It should be slamming the rev limiter with those mods and a stock prop.
    Change your spark plugs first!

    This is the impeller you need to be running on your ski (greenhulk coupon code will save you 10%)
    http://www.4-tecperformance.com/inde...products_id=12
    thats exactly what i said in his "4-tec missing" thread...

  7. #7
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    What missing thread??
    Here are his other two threads on the same issue.
    http://www.greenhulk.net/forums/show...334&highlight=

    http://www.greenhulk.net/forums/show...644&highlight=
    Quote Originally Posted by meeper View Post
    thats exactly what i said in his "missing" thread...

  8. #8

    Join Date
    Dec 2011
    Location
    Orlando
    Posts
    21
    Quote Originally Posted by beerdart View Post
    What missing thread??
    Here are his other two threads on the same issue.
    http://www.greenhulk.net/forums/show...334&highlight=

    http://www.greenhulk.net/forums/show...644&highlight=
    These issues are unrelated. The ski does slam 8000 and 70mph no problem without a load. I want a prop that will be better suited for putting the ski under a reaaallly heavy load.

  9. #9
    83.0 @ 8400 jhill19's Avatar
    Join Date
    Jul 2010
    Location
    Teays Valley, West Virginia
    Posts
    2,800
    +1
    81
    you need to get the missing issue situated before modding further

  10. #10

    Join Date
    Dec 2011
    Location
    Orlando
    Posts
    21
    Quote Originally Posted by jhill19 View Post
    you need to get the missing issue situated before modding further
    You're right. But Im just planning and still havent had my question answered. Lets just say if I were to be using this as a tug boat, what type of impeller would I need? I dont mind if you show me the part or just show me some reading on pwc impellers.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. will stock 15f prop work in a 12f?
    By wave15stx in forum Kawasaki PWC Performance (4-stroke)
    Replies: 1
    Last Post: 08-11-2009, 02:47 PM
  2. Will an RXT-X Prop work on an RXT?
    By flyguytki in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-04-2008, 02:23 AM
  3. RXT prop on GTX-will work?
    By HoopsRXT in forum 4-Tec Performance
    Replies: 2
    Last Post: 08-07-2007, 11:34 PM
  4. Prop work.
    By Flying Scotsman in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 01-27-2007, 11:35 PM
  5. Prop work
    By sbogi in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 05-05-2006, 11:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •