Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176

    Conversion Driveshafts

    GPRXP Conversion Drive Shafts
    Note: this is a modification performed to your core shafts.

    This conversions drive shaft, along with the motor mounts provide a quick, easy way to install your 2004+ SeaDoo 4-Tec engine into the 2000-2008 Yamaha GPR hull.

    -Uses OEM shafts
    -no need for a separate mid shaft support
    -can use RXP OR RXT driveshaft for the conversion
    -Uses late model 02-08 GPR mid shaft
    -Allows for a direct installation of OEM Yamaha pumps, or aftermarket pumps designed for the GPR
    -Can be used with a SeaDoo pump adapter.

    What to send:
    -RXP OR RXT driveshaft with good engine side splines. Remove and keep the rubber bumper for re-assembly. SeaDoo shaft may be cut to 12”. Send engine side(small Splines)
    -02-08 GPR midshaft. Must have good internal splines.
    -Return Shipping / Contact information

    What the price includes:
    -Disassembly of your 02-08 midshaft
    -Machining of your 4tec driveshaft
    -Assembly of your conversion shaft


    $150 with good cores+ Shipping

    Core shafts are occasionally available for purchase upon request.


    The 08+ SeaDoo shafts not only have the rubber coating, but also have a different carbon seal flange/ bearing race. Lead times will be longer than the usual 2-3 days on any 08+ seadoo parts because instead of an exchange, I need to machine and return you specific parts. Lead time could be 2-3 weeks.


    Here is the part # and cross reference of the 02 GPR midshaft. Any of these will work for this setup. Aftermarket shafts WILL NOT WORK!

    Yamaha SHAFT, COUPLOR
    SHAFT, COUPLOR

    Yamaha Part Number Variations
    68N-51323-00-00
    68N 51323 00 00
    68N513230000
    68N51 3230000
    68N513 230000
    68 N5132 30000
    68N5 1323 0000
    68N 513 230 000
    68 N5 13 23 00 00

    This Yamaha SHAFT, COUPLOR also fits:
    2001 XA1200AZ XLT1200 JET UNIT 2
    2002 GP1200AA GP1200R JET UNIT 2
    2002 GP800AA GP800R JET UNIT 2
    2002 SV1200A SUV1200 JET UNIT 2
    2002 XA1200AA XLT1200 JET UNIT 2
    2002 XA800AA XLT800 JET UNIT 2
    2003 GP1300B GP1300R JET UNIT 2
    2003 GP1300CB GP1300R JET UNIT 2
    2003 GP800AB GP800R JET UNIT 2
    2003 SV1200B SUV1200 JET UNIT 2
    2003 XA1200AB XLT1200 JET UNIT 2
    2003 XA800AB XLT800 JET UNIT 2
    2004 GP1300C GP1300R JET UNIT 2
    2004 GP1300CC GP1300R JET UNIT 2
    2004 GP800AC GP800R JET UNIT 2
    2004 SV1200C SUV1200 JET UNIT 2
    2004 XA1200AC XLT1200 JET UNIT 2
    2004 XA800AC WAVERUNNER XLT800 JET UNIT 2
    2005 GP1300D JET UNIT 2
    2005 GP800AD WAVERUNNER GP800R JET UNIT 2
    2005 XA1200AD WAVERUNNER XLT1200 JET UNIT 2
    2006 GP1300E WAVE RUNNER 1300R JET UNIT 2
    2007 GP1300F WAVERUNNER GP1300R JET UNIT 2
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Picture 066.jpg 
Views:	751 
Size:	72.6 KB 
ID:	262616  


  2. #2
    iron head's Avatar
    Join Date
    Aug 2006
    Location
    ONT CANADA
    Posts
    616
    +1
    2
    Thanks mike

  3. #3
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    to the top

  4. #4
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    I have a few in stock and some cores available for purchase

  5. #5
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    bump

  6. #6
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    Ttt for those inquiring

  7. #7

    Join Date
    May 2012
    Location
    California
    Posts
    1,553
    +1
    130
    do you have any of the 02-08 intermediate shafts available?

  8. #8
    Paul2005GPR's Avatar
    Join Date
    Oct 2009
    Location
    Northern Illinois
    Posts
    704
    +1
    42
    Maulin marto does..

  9. #9
    want2bem3's Avatar
    Join Date
    Sep 2013
    Location
    Philly PA
    Posts
    40
    +1
    3
    What is the price with both cores?

  10. #10
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    Sorry but I am out of cores right now. Here and ebay are where I usually find them.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts gp-rxp conversion driveshaft & Conversion motor mounts made by addicted
    By carlito30 in forum Conversion Skis Classifieds
    Replies: 8
    Last Post: 04-18-2016, 01:41 PM
  2. Conversion Driveshaft for SeaDoo Pump
    By YamahaManny in forum Conversion PWC Performance Skis
    Replies: 15
    Last Post: 01-25-2014, 11:50 PM
  3. conversion driveshafts
    By hydrojunkie in forum Conversion Skis Classifieds
    Replies: 0
    Last Post: 04-23-2009, 03:44 PM
  4. WTB: conversion driveshaft by Ted
    By jeffsntx in forum Conversion Skis Classifieds
    Replies: 12
    Last Post: 08-26-2008, 08:39 PM
  5. WTB Ted´s conversion driveshaft
    By ExciterGPR in forum Conversion Skis Classifieds
    Replies: 1
    Last Post: 06-20-2008, 02:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •