Results 1 to 4 of 4
  1. #1
    diamondwatercraft's Avatar
    Join Date
    Apr 2007
    Location
    SE Michigan
    Posts
    622
    +1
    13

    Taking apart my MPEM again

    After last year's nightmare on my XP DI with a level one. I have finally figured out that I have a bad MPEM. This is the second MPEM on my ski since new and I have removed it out of the plastic mounting housing. (fixed the last one that fried but threw it away when I found one for $100 4 years ago)

    My question applies to the MPEM and how everything is laid out. Has anyone ever had one apart and do you have any pics of the inside of it with all the black rubber removed? (kick myself for not taking some the last time) I am looking for the air intake section.

    If I remember right on my last one, the schematic will give me a layout of the boards but I don't know which side they are on. (inside or out)


    Jim

    p.s. I will also have to go through the entire electrical system to look for my short


  2. #2
    diamondwatercraft's Avatar
    Join Date
    Apr 2007
    Location
    SE Michigan
    Posts
    622
    +1
    13
    Sounds like I am on an island with this one!

  3. #3

    Join Date
    Feb 2012
    Location
    San Diego,CA
    Posts
    24
    +1
    1
    Check all fuses located in the rear electrical box with the cdi and solenoid as well as the front box (MPEM).

  4. #4
    diamondwatercraft's Avatar
    Join Date
    Apr 2007
    Location
    SE Michigan
    Posts
    622
    +1
    13
    I hear you. I have gone through all that. I actually switched it with my other DI and it coded on that machine the same as my XP. Thanks for the suggestion though.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Winter project Tearing apart my 95 SL750
    By Slick PWC in forum Polaris Projects
    Replies: 204
    Last Post: 03-23-2010, 12:36 AM
  2. Taking apart the SC
    By aha in forum 4-Tec Performance
    Replies: 6
    Last Post: 02-24-2009, 02:27 PM
  3. How to take apart and clean Start/Stop switch??
    By Old Atari Nut in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-27-2008, 09:27 AM
  4. Rebuilding my Carbs. AGAIN! Please chime in ... POP OFF and Springs Yama1200xlt 2005!
    By vjkevlar in forum Yamaha PWC Performance (2-stroke)
    Replies: 116
    Last Post: 07-29-2008, 12:20 PM
  5. A Polaris kicked my ass again! lol
    By javiert99 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 05-21-2007, 09:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •