Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
  1. #1

    Join Date
    Jan 2009
    Location
    Mechanicsville, Md
    Posts
    286

    2000 GP1200R Modded Ski $4000

    SOLD. THANKS FOR LOOKINGHate to see her go but I have to move on. I bought this ski about 5 yrs ago. It was stripped down to the bare hull three years ago as a winter project. Hull was trued and sanded with 600 grit to make it stable and super slippery in the water. It was sprayed with a satin black for that stealth vibe. New hydro turf mats, new custom seat cover. The motor is basicly brand new. It was pulled down to the block and a trued and welded crank was installed. All bearings and seals were replaced. Cases and cylinders were ported and a new top end was installed. It has a Riva high compression triple head with the girdle kit. Full Factory Pipes exhaust system. This thing is loud and sounds AMAZING going down the river. Feeding the motor are triple external fuel pumps with triple fuel pickups. 48mm Novi carbs with Riva F/As are bolted to the Dominator intake setup. Spark comes from 3 sea-doo high power coils and is controlled by an Advent ignition system with 4 custom ignition curves. 1 for pump gas and 3 for race fuel. Propulsion comes from a solas impeller pitched by Impros. Also has a scoop grate, Riva auto-dump nozzle, carbon fiber ride plate and sponsons. No expense was spared in the rebuild of this ski and it has seen very few hrs in the last 2 yrs due to me purchasing a boat. I did get time to do a few top speed runs a year ago and on a 50/50 race/pump gas mix in the least aggressive race fuel ignition curve I GPSed it at 83.1mph and with a a bit more tuning I think it'll break 85. I will not negotiate on price. With all the time and money I've put into this ski it is the deal of the century. Sale does NOT include a trailer. SKI ONLY. I also have an upgraded Skat Trak 12 vane set-back jet pump I will include in the sale for an additional $500. Any questions please email me. I check my mail pretty much all day and will either respond or give you a call if you leave your number. Located in Southern MD.

    charliecarlson1024 at gmail.com

    Thanks
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG00369-20090607-1911.jpg 
Views:	523 
Size:	130.3 KB 
ID:	262904   Click image for larger version. 

Name:	IMG00068-20090909-1621.jpg 
Views:	507 
Size:	109.8 KB 
ID:	262903   Click image for larger version. 

Name:	IMG00065-20090909-1619.jpg 
Views:	379 
Size:	127.0 KB 
ID:	262902   Click image for larger version. 

Name:	IMG00371-20090607-1912.jpg 
Views:	1257 
Size:	114.2 KB 
ID:	262905   Click image for larger version. 

Name:	IMG00372-20090607-1912.jpg 
Views:	564 
Size:	110.5 KB 
ID:	262906  
    Last edited by megachuck; 08-06-2012 at 06:43 AM. Reason: Sold


  2. #2
    Tedcfitz's Avatar
    Join Date
    Jan 2012
    Location
    Dunn NC
    Posts
    176
    Shoot me a PM.

  3. #3

    Join Date
    Jan 2012
    Location
    fairfield twp., Ohio 45011
    Posts
    10
    With all of these mods I am going to go on a long shot and see if you have a part leftover that I am in bad need of for my 01 gp1200r. Looking for what I believe is called a cam linkage for the carbs. It is used for low speed throttle and I am missing this. If not then free bump on a nice ski!

  4. #4

    Join Date
    Jan 2009
    Location
    Mechanicsville, Md
    Posts
    286
    Quote Originally Posted by roscoe View Post
    With all of these mods I am going to go on a long shot and see if you have a part leftover that I am in bad need of for my 01 gp1200r. Looking for what I believe is called a cam linkage for the carbs. It is used for low speed throttle and I am missing this. If not then free bump on a nice ski!
    Sorry, I dont have many old parts anymore. Getting out of waverunners and have either sold or trashed most of my stock parts inventory. Thanks for the bump though!

  5. #5
    old school big raider's Avatar
    Join Date
    Sep 2006
    Location
    dallas,tx
    Posts
    1,423
    i think i will buy it if its still for sale and i can get a decent shipping price-would be a great stablemate to the fzr

  6. #6

    Join Date
    Jan 2009
    Location
    Mechanicsville, Md
    Posts
    286
    Quote Originally Posted by big raider View Post
    i think i will buy it if its still for sale and i can get a decent shipping price-would be a great stablemate to the fzr
    Still available as of now. A few people have shown interest but money talks... PM or email me if you decide you want to pull the trigger on it.

  7. #7

    Join Date
    Jan 2009
    Location
    Mechanicsville, Md
    Posts
    286
    Bump

  8. #8
    still available?

  9. #9

    Join Date
    Jan 2009
    Location
    Mechanicsville, Md
    Posts
    286
    Quote Originally Posted by asia517 View Post
    still available?

    Yep...

  10. #10
    GTLaser's Avatar
    Join Date
    Aug 2009
    Location
    MD
    Posts
    330
    I can't believe this ski hasn't sold.... I may have to come see it.... You have water near you?

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 2000 GP1200R Modded Ski
    By megachuck in forum Yamaha 2 Stroke Skis
    Replies: 7
    Last Post: 04-28-2011, 12:20 AM
  2. FS 2000 GP1200R(modded)
    By BoostCrzy in forum Yamaha 2 Stroke Skis
    Replies: 16
    Last Post: 10-30-2010, 12:20 AM
  3. FS 2000 GP1200R Race ski.
    By megachuck in forum Yamaha 2 Stroke Skis
    Replies: 13
    Last Post: 10-11-2010, 10:10 PM
  4. FS 2000 GP1200R Race ski.
    By megachuck in forum Yamaha 2 Stroke Skis
    Replies: 0
    Last Post: 05-18-2010, 05:52 PM
  5. 2000 gp1200r mods
    By jprochnow in forum Yamaha Open Discussion
    Replies: 0
    Last Post: 08-06-2008, 10:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •