02-01-2012, 05:59 PM #1
2005 3d motor question from a yamaha guy...help
I normally run yamaha's so Im not up on the sea-doo two strokes... A friend has a 3d ski (the one that you ride like a go kart, motocross,or stand-up) his ski has the 800 cc fuel injected motor......my question is : will a 951 drop into this hull , will the 951 jug fit the 800 case ? any thought you guy's have on this will be greatly appreciated . thanks in advance........txgp1300r
02-01-2012, 07:08 PM #2
I thought that the 3D came with a 951? but to answer your questions. No, the 951 will not drop in. the front motor mount is on the wrong side. you would also have to swap all the electronics. the jugs are not interchangeable from a 951 to 800...however, if you could find some VE racing jugs you could have a larger motor using the same cases. I think its 900cc? they are rare and expensive if i remember correctly. if you want to see what is involved in a 800/951 swap take a look at the build i did with my XP its called "Airborne's 951 XP"
02-02-2012, 12:21 PM #3
First gen 3D had the 800 RFI engine in it second gen had the 951DI engine.
02-03-2012, 12:58 AM #4
cool...thanks...he has the 800 with no Balls !
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By rcab85 in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 11-26-2011, 04:56 PM
By new in forum Yamaha PWC Performance (4-stroke)Replies: 16Last Post: 05-28-2011, 03:44 PM
By jfoster in forum Yamaha 2 Stroke SkisReplies: 3Last Post: 05-07-2011, 12:59 PM
By rpt50 in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 06-13-2010, 10:31 PM
By NeverEndn in forum Yamaha PWC Performance (2-stroke)Replies: 31Last Post: 07-15-2007, 11:41 PM