Thread: 2008 Sea-Doo RXP-X 74mph+
02-09-2012, 11:21 AM #1
2008 Sea-Doo RXP-X 74mph+
Bought back new late spring of 2008. End of 2009 piston rings failed and after my local dealer spun a bearing on the crank trying to rebuild the original motor they finally decided to get a brand new one from Sea-Doo spring 2010. Then this past spring the timing chain let go which damaged the 8 out of 12 valves, flywheel, and both oil pumps. So all new parts were bought from my dealer to rebuild it and while it was apart we put we swapped out the oem pistons for some brand new Riva pistons.This motor has about 50 hours total on it since it was originally installed by the dealer and 5 hours since being rebuilt back in July 2011 by my mechanic Mitch. Total hours on the ski is 126.
VA Registration good until July 2014 and have title in hand.
Includes OEM cover.
Always stored indoors and winterized
Supercharger Clutch Slip when last checked a few months ago was good and holding at 13ftlbs
Pump was completely rebuilt back in the spring of 2011 and has rough 20-25 hours on it.
74-75mph in race setup on gps
Setup for pump gas and I always ran 93octane in it.
Doesn't include a trailer as of right now. I can probably find one or if someone buys this and the other RXP-X I'm selling I may throw in the triton elite double trailer they are both currently sitting on.
This is a great setup for stock class racing and can be a very reliable rec ski.
I have roughly $5,000 invested in aftermarket and oem parts.
EDIT: Found the piece of paper that I used to write down the hours when we rebuilt it and it was at 121 total. So it's now at 126 total which would be 5 hours on it since being put back together last July not 10-15. Pictures were taken in December and the last time I rode them before being winterized was mid October.
Mods done to the ski are:
Sea-Doo Centre 8650 ECU
Sea-Doo Centre Valve Spring Retainers
Sea-Doo Centre 4" Air Intake
New Riva 8.4:1 Pistons
Jet Draft Open Loop Cooling
Jet Draft custom made oil catch can
Rotax Racing Heavy Duty Front Motor Mount
Riva Handle Bars
HT Moto Seat Cover
Hydro-Turf Side Lifters
Worx Intake Grate
Solas 14/19R Impeller
Lowered OEM Sponsons -20mm
Intake Manifold Flame Arrestor removed
Riva Performance OPAS Block Offs
New set of OEM Valves
New OEM Flywheel
New OEM Timing Chain
New OEM Front/Rear Oil Pumps
Carbon Fiber Mirror Block Offs
T-Bolt Clamps on IC and SC
Price is $8,000 or best offer.
Any questions feel free to pm me.
Last edited by kenshin89; 05-23-2012 at 08:46 AM. Reason: Updated Price
02-09-2012, 11:23 AM #2
more pictures of the ski.
02-09-2012, 11:26 AM #3
last of the pictures.
02-14-2012, 09:26 AM #4
02-25-2012, 08:51 AM #5
03-08-2012, 08:43 AM #6
03-17-2012, 04:11 PM #7
Washed and waxed ready for the season New price of $8,500. Also took some new pictures.
03-17-2012, 04:15 PM #8
03-17-2012, 04:20 PM #9
03-17-2012, 04:28 PM #10
Last 3 pictures.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By kenshin89 in forum Sea Doo 4Tec SkisReplies: 13Last Post: 05-23-2012, 08:45 AM
By Lake rat RXP in forum Sea Doo 4Tec SkisReplies: 5Last Post: 05-04-2012, 06:20 PM
By Lenn1562 in forum Sea Doo Open DiscussionReplies: 17Last Post: 11-13-2009, 03:23 PM
By MPower in forum Sea Doo 4Tec SkisReplies: 17Last Post: 06-30-2009, 07:59 AM
By redrocket in forum Sea Doo ClassifiedsReplies: 8Last Post: 07-31-2008, 11:13 PM