Thread: Thru hull fitting?
02-14-2012, 03:23 PM #1
Thru hull fitting?
I need a thru hull fitting to bleed my xs intercooler. What size do I need and where to get it? Please help.
02-14-2012, 08:11 PM #2
02-14-2012, 08:57 PM #3
use the spare though hull fitting in the pump shoe, you just need to drill it out.
02-14-2012, 09:12 PM #4
02-14-2012, 10:00 PM #5
Just below the steering cable, if you look in the inside it should have a barb, inside it has a bit of plastic blocking it that you can drill out.
02-14-2012, 10:16 PM #6
The smallest fitting in the store works good and you then can put fitting anywhere u want.
you can see my 90 degree thru Hull fitting for bleed on right rear.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tileman in forum Yamaha ClassifiedsReplies: 2Last Post: 07-15-2011, 10:03 AM
By RHeller1 in forum Yamaha ClassifiedsReplies: 3Last Post: 10-03-2009, 01:25 PM
By keith neff in forum Sea Doo Open DiscussionReplies: 0Last Post: 08-03-2008, 11:05 AM
By klutch_nut in forum Polaris Open DiscussionReplies: 5Last Post: 04-25-2008, 09:56 AM
By BBCaprice in forum Polaris How To & FAQsReplies: 4Last Post: 03-22-2008, 09:59 PM