02-17-2012, 12:09 PM #1
Waterjet and other fabrication projects
I've got some random projects that I've been messing with and figured I would share:
A buddy of mine wanted a 4' X 4' Harley Davidson sign in his bar so I drew this up and cut it out of 1/4" Alum.
Currently working on this project for a VW TDI, it's an EGR elmination pipe:
These are some sponsons that I had cut out of 3/8" Alum that will bolt to the Riva backing plates:
These are some OPAS block offs that I cut out on the waterjet and had powdercoated:
02-17-2012, 10:15 PM #2
water-jets are soooo cool
02-22-2012, 04:20 PM #3
The VW TDI EGR elimination pipe and block off turned out pretty good. Added a barb for a boost gauge.
02-25-2012, 02:20 PM #4
02-25-2012, 08:45 PM #5
This is what prompted the need for the EGR delete ...... Apparently this is a common issue on the TDI's.
06-05-2012, 09:49 AM #6
06-06-2012, 04:47 PM #7
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tron in forum Sea Doo Open DiscussionReplies: 14Last Post: 03-09-2012, 01:07 AM
By tron in forum Yamaha ClassifiedsReplies: 18Last Post: 07-02-2010, 08:28 AM
By afcblink in forum Shops, Tools and TricksReplies: 14Last Post: 05-14-2009, 01:48 PM
By Saladbar in forum Sea Doo Open DiscussionReplies: 4Last Post: 05-25-2006, 11:18 AM
By mxl16 in forum 4-Tec PerformanceReplies: 31Last Post: 01-25-2006, 12:04 AM