02-17-2012, 03:55 PM #1
XS intercooler bracket vs speedfreaks
looking for a side by side picture of the two. my speedfreaks bracket is too close to the turbo outlet and looking to move it back, curious to how far i need to move. any help
02-17-2012, 05:40 PM #2
What xs bracket are you speaking of?
I think the only ones out there made specifically for the XS are Speed Freeks and Fizzles.
Both set the cooler close as possible to the motor which is good but not in your case.
At one time fizzle just used a strap that set the ic back a bit further and might work for you but I reccomend something more secure.
You might be able to mod the SP bracket your have or build someting from scratch.
02-17-2012, 10:03 PM #3
figured it out just drilled new holes and mounted further back. simple thanks oh btw i was talking about the fizzle
02-17-2012, 10:18 PM #4
02-17-2012, 10:28 PM #5
thanks steven, would have pics if i had a shoe to mount the bracket to. hopefully soon. what bracket are yall turbo guys using?
02-17-2012, 10:33 PM #6
02-17-2012, 10:48 PM #7
02-18-2012, 12:52 PM #8
02-18-2012, 03:45 PM #9
So first pic is before you moved the ic back?
Nice valve cover.
02-18-2012, 03:58 PM #10
- Join Date
- Dec 2006
- Crest Hill, IL
If you turn the IC so the inlet lines up with the turbo outlet, then you will have an easier time getting to the TB with the way the manifold is setup now, the TB mounts lower and away from the motor...
AND, with the way the manifold is, and you have open loop cooling, you can run a Kanaflex line under it and directly into the turbo
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RXPwilly13 in forum Sea Doo ClassifiedsReplies: 9Last Post: 10-14-2011, 05:30 PM
By WICKEDSEADOO in forum Sea Doo ClassifiedsReplies: 2Last Post: 06-01-2011, 01:13 AM
By Laxcrazy23 in forum 4-Tec PerformanceReplies: 1Last Post: 08-16-2010, 07:14 AM
By Speed_Freak_039A in forum Sea Doo ClassifiedsReplies: 8Last Post: 07-08-2010, 10:31 AM
By Laxcrazy23 in forum 4-Tec PerformanceReplies: 23Last Post: 05-29-2010, 09:10 PM