Results 1 to 2 of 2
  1. #1

    Join Date
    Nov 2011
    Location
    New Jersey
    Posts
    16

    2005 xlt1200 needle & seat size.

    I'm rebuilding my 2005 XLT1200 pv. While its apart i decided to rebuild the carbs.
    Should I replace the needles, seats and springs? If so what size/color should I get? What should the pop off pressure be?
    Should I rebuild the accelerator pump? Not sure if the carb kits have the parts for the pump.
    Should I replace jets. If so should I use stock jets? Machine is completely stock.

    Thanks

    John


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,634
    +1
    404
    Recommend upgrading the jets/needles/springs if you are going in there

    look in the how to do/faq section for specs on needle and seats, jetting, return jet, and spring/pop off ... with the new specs on the carbs, you wont need the accel pump

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 96 waveraider 700 carb size and needle and seat size
    By ktheake in forum Yamaha Old School Skis
    Replies: 3
    Last Post: 09-11-2015, 07:30 AM
  2. Needle and seat size for 1994 WaveRaider and 1997 GP1200
    By dannyual777 in forum Yamaha Old School Skis
    Replies: 2
    Last Post: 08-08-2014, 11:14 PM
  3. Polaris SLTX Needle and Seat Size
    By Racer26 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 03-05-2012, 10:44 AM
  4. 2001 Yamaha XLT 1200 Needle and Seat size
    By Vw4me33 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-20-2011, 08:33 PM
  5. gp800 stock needle and seat size
    By w-nut in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 01-24-2008, 09:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •