Thread: R3 Timing ?
02-22-2012, 06:58 PM #1
R3 Timing ?
Any idea on were the timing is at in the mid-range and WOT.
02-22-2012, 09:37 PM #2
WOT is 20 degrees at around ~15 psi, as the boost goes up past that the ecu retards timing.
02-22-2012, 10:23 PM #3
02-23-2012, 10:36 PM #4
i have no idea on the mid-range, but i believe they keep the timing in the mid-range conservative because thats where most rec skis spend most of their time cruising, too much timing in the mid is not good if you cruise or spend alot of time riding in that rpm range, things can get hot quick.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By krouchchocolate in forum 4-Tec PerformanceReplies: 2Last Post: 01-24-2012, 04:14 AM
By stretch22 in forum 4-Tec PerformanceReplies: 2Last Post: 08-03-2010, 04:47 AM
By gtxforlife88 in forum 4-Tec PerformanceReplies: 4Last Post: 07-05-2010, 05:31 PM
By HOSS in forum 4-Tec PerformanceReplies: 6Last Post: 09-08-2008, 09:04 PM
By polarisman01 in forum Polaris Open DiscussionReplies: 4Last Post: 02-15-2007, 10:13 PM