Thread: walbro pump 08+
02-25-2012, 05:46 PM #1
walbro pump 08+
I know a walbro pump will not fit directly into the 08+ fuel pump location because it is slightly taller than the stock pump. Can anyone tell me how they modified it to work? Trim the pump down, etc?
I currently want to retain the stock FPR if possible. It is going on my 2011 rxpx that will have a vtec flash for 50lb injectors.
02-25-2012, 06:01 PM #2
Why bother with a walbro with stock FPR and 50s - stock pump will be fine.
02-25-2012, 07:53 PM #3
at what point do you stop trusting the stock pump?
02-25-2012, 07:55 PM #4
02-25-2012, 08:00 PM #5When it stops working.......
02-25-2012, 08:06 PM #6
Yep, it could be. But the same could happen to the Walbo or any FP for that matter.
02-25-2012, 08:42 PM #7
Stock pump only has trouble with higher pressure or if you have BIG injectors that flow more than the pump can provide.
02-25-2012, 08:58 PM #8
so where is the cutoff? 60lb injectors? bigger?
02-25-2012, 11:08 PM #9
02-25-2012, 11:57 PM #10
do you mean trim the plastic on the pump itself or the plastic the pump sits in?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
WTB walbro pumpBy otoss in forum Sea Doo ClassifiedsReplies: 18Last Post: 02-18-2012, 01:21 PM
By tocullo in forum 4-Tec PerformanceReplies: 2Last Post: 01-24-2012, 08:27 PM
WTB walbro pumpBy otoss in forum Sea Doo 4Tec SkisReplies: 0Last Post: 11-27-2011, 06:28 PM
By Mike H in forum 4-Tec PerformanceReplies: 2Last Post: 07-02-2010, 11:25 AM
By mitch411RXP in forum 4-Tec PerformanceReplies: 19Last Post: 07-13-2009, 12:12 PM