Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18
  1. #1
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165

    FS 2003 GPR Ported Big Bore.

    Reluctantly selling my GPR it has the following : blue printed hull, SS grate ,jettrim seat cover,motocross bars, under visor has been drilled for more air , aftermarket sponsons ,tabs are stepped down .200, R&D steering nozzle, HO pump with impros dynafly 14/23,pump shoe area has been carbon fibre reinforced and the yamaha re-call for pump shoe area has been completed,pump plug kit , billet intake grate mount.Hydro turf mats. Engine:Ben Herman ported big bore EFI 87mm , head was cut by lowell and I had it trimmed so that the compression is 150 psi,true and welded crank, msd wires, powershot fuel controller , pet tach ,Ross nemo sonic boom ported throttle bodies with stacks, single pipe with D-plate, 1200 water box, jetworks valve , v-force III reeds .3 deg keyway .engine has only amzoil interceptor oil run in it. I add one x-tra ounce per gallon to make up for the powershot adding x-tra fuel. This ski runs great at around 75 gps all day long..it has gone faster but I have the plate angle at around .940 ish for handeling. If this ski sells, it is "as is" , make sure this is what you want if you purchase this ski , it turns very hard and will throw you off if you cant ride. I can help with delivery if its within a few hundered miles of Texas or Louisianna. I have an x-tra piston kit , 1200 grate, ski cover , and a boat prop ( fast prop) that will go with the ski. PM me with any questions or offers in the 3 thousand range.thanks TXGP1300R......David Click image for larger version. 

Name:	875.jpg 
Views:	525 
Size:	66.3 KB 
ID:	264859
    Last edited by txgp1300r; 03-26-2012 at 06:07 AM.


  2. #2
    TX21's Avatar
    Join Date
    May 2007
    Location
    North Texas
    Posts
    988
    +1
    7
    Nice ski. Wish I didn't have my GPR so I could pick this one up.

  3. #3
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    3900 bucks , you come get it....i need the room.

  4. #4

    Join Date
    Jul 2011
    Location
    Niceville, FL (NWFL)
    Posts
    12
    A little far from me but how many hours are on it?

  5. #5

    Join Date
    Jul 2011
    Location
    Niceville, FL (NWFL)
    Posts
    12
    A little far from me but how many hours are on it? Any motor pics?

  6. #6
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    about 70 hours on this crank and 10 to 25 on the ben herman jugs....about 230 on the odometer..new pump in 2005 HO , has fresh dynafly from impros. look at my album , there are some engine photo's.

  7. #7
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    added a motor pic

  8. #8
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    added a pic of motor..
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0325.jpg 
Views:	577 
Size:	112.6 KB 
ID:	266529  

  9. #9
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    the first 3200 cash in my hand gets this ski..I dont have the time to deliver more than four or five hours from DFW and really dont want to part out a running ski.....all 3 cylinders tested 150 psi today......................here is a parts list : stock head cut for 150 psi, Ben Herman ported 87mm jugs with group K pistons, 3 deg keyway ,ross ported throttle bodies, vf3's , d-plate , riva free flow tube with 1200 water box, 05 ho pump with 14/23 impros dyna fly, r&d 800 grate,ppk, jims cut ride plate, R&D steering nozzle , billet grate mount , carbon fiber tunnel reinforcement, motocross bars , efi fuel tuner powershot, msd wires,exotic sign graphics, jet trim seat, hydro turf mats, memory tach, 300 hours on guage...about 20 to 40 on this top end, around 100 on true and welded crank.amzoil interceptor oil only..thats it... If it dont sell ill just keep riding it.....thanks for looking.

  10. #10
    Im very interested in buying this ski 574-606-7402 please call asap

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 4
    Last Post: 08-25-2016, 05:51 PM
  2. FS GPR 800/1200/1300 Triple exhaust ports/Big bore Cylinders
    By Luis Marine in forum Yamaha Classifieds
    Replies: 3
    Last Post: 06-27-2015, 04:34 PM
  3. FS Lowell Porting Big Bore 1390 - Hotrods T/W Crank
    By YamahaPat in forum Yamaha Classifieds
    Replies: 14
    Last Post: 11-05-2009, 12:19 PM
  4. 83+mph 2005 GP1300R Ported Big Bore
    By Bryan K in forum Yamaha 2 Stroke Skis
    Replies: 36
    Last Post: 07-02-2009, 06:06 PM
  5. FS: R&D GPR Billet big bore heads
    By MTRHEAD in forum Yamaha Classifieds
    Replies: 7
    Last Post: 07-26-2008, 06:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •