Results 1 to 6 of 6
  1. #1
    JD
    Join Date
    Oct 2011
    Location
    Europe
    Posts
    100
    +1
    4

    CP pistons NEED ADVICE

    Today I put CP pistons into my RXPX instead of OEM, and when CP piston is in the lowest position it touches oil injector. Can I bend oil injector alittle bit down or there is another way to solve this problem ?


  2. #2
    Stockrxp's Avatar
    Join Date
    Aug 2010
    Location
    texas
    Posts
    1,009
    +1
    1
    Something isnt right do NOT bend injector. are all of the pistons hitting or just one? picture?

  3. #3
    Quote Originally Posted by Stockrxp View Post
    Something isnt right do NOT bend injector. are all of the pistons hitting or just one? picture?
    No that's normal, CP just started to notch the pistons.
    Yes you can bend the oil jets a little or notch the pistons.

  4. #4
    Eastside Powersports Slow 91's Avatar
    Join Date
    Sep 2008
    Location
    River Crew CT
    Posts
    4,248
    +1
    544
    no problems at all bending the oil squirter.

  5. #5
    Swedish Viking Craigo's Avatar
    Join Date
    Jun 2008
    Location
    Seattle
    Posts
    1,367
    +1
    62
    Quote Originally Posted by j.dabrila View Post
    Today I put CP pistons into my RXPX instead of OEM, and when CP piston is in the lowest position it touches oil injector. Can I bend oil injector alittle bit down or there is another way to solve this problem ?
    Don't bend them!!! All you have to do is loosen up the oilers, rotate them as far as they will turn, hold them in place - and tighten them back down.

  6. #6
    JD
    Join Date
    Oct 2011
    Location
    Europe
    Posts
    100
    +1
    4
    thanks for your fast answers, all are different so it's complicated to decide
    all three are touching. if i bend them 1-1.5 mm then it wouldn't touch. i think i'll try bending, as the position of injector wouldn't change a lot

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wife's GPR chewed a piston. Need advice
    By yamadood in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 06-21-2011, 02:19 PM
  2. Need Advice on replacing a holed piston
    By mikerosi in forum Polaris Open Discussion
    Replies: 1
    Last Post: 08-12-2009, 07:55 PM
  3. Help! GPR middle piston with hole. need advice.
    By jimshearer in forum Yamaha Open Discussion
    Replies: 16
    Last Post: 06-16-2008, 01:52 PM
  4. Piston Wash need advice
    By race24x in forum Polaris PWC Performance
    Replies: 27
    Last Post: 09-06-2007, 02:00 PM
  5. Melted pistons - need carb setting advice
    By Byteme in forum Yamaha PWC Performance (2-stroke)
    Replies: 27
    Last Post: 12-29-2006, 01:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •