Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25
  1. #1
    ...Lighting The Water On Fire Since '04 duramaxxed's Avatar
    Join Date
    Jun 2008
    Location
    The Hamptons, Long Island, New York
    Posts
    790
    +1
    5

    Riva Free Flow Exhaust Kit On '12 P-X??

    Does anyone know why this wouldn't Fit the New '12 P-X? http://www.rivayamaha.com/RivaStore/...0Exhaust%20Kit To me, it Looks like it should Fit Perfect.

    I was going to do the Whole Exhaust Pipe Piece that goes from the Waterbox to the Hose after the Resonator. http://www.rivayamaha.com/RivaStore/...0Exhaust%20Kit

    But if I can Save a few Bucks and do this Elbow Piece and if it'll Work and Fit the same as the Longer Pipe, why not do it, right?


  2. #2
    eric1238's Avatar
    Join Date
    Jun 2005
    Location
    Smith Mtn. Lake VA
    Posts
    728
    +1
    2
    I believe it will work. It did on the 2010 T-X and I think the setup is the same. 10% off if you order it here, right?

    http://www.4-tecperformance.com/inde...roducts_id=751

  3. #3
    ...Lighting The Water On Fire Since '04 duramaxxed's Avatar
    Join Date
    Jun 2008
    Location
    The Hamptons, Long Island, New York
    Posts
    790
    +1
    5
    Yep, should be 10%. I was just Looking at the Install Instructions on Riva's Site, so the Hotlink was right there.

    I Wonder what Difference, if any, there is between the Full Replacement Pipe and this Shorty. Other than the Price.

  4. #4
    eric1238's Avatar
    Join Date
    Jun 2005
    Location
    Smith Mtn. Lake VA
    Posts
    728
    +1
    2
    You talking about the through hull for $269?

    http://www.4-tecperformance.com/inde...roducts_id=301

  5. #5
    ...Lighting The Water On Fire Since '04 duramaxxed's Avatar
    Join Date
    Jun 2008
    Location
    The Hamptons, Long Island, New York
    Posts
    790
    +1
    5
    Quote Originally Posted by eric1238 View Post
    You talking about the through hull for $269?

    http://www.4-tecperformance.com/inde...roducts_id=301
    Nope, this Piece: http://www.4-tecperformance.com/inde...oducts_id=1609 It Replaces the Factory Rubber Hose from the Waterbox to the Outlet End of the Resonator.

    The Short Elbow that I Asked about above Replaces ONLY the Resonator. It still Uses the Rubber Exhaust Hose from the Waterbox to the Resonator Inlet.

  6. #6
    saltyqld's Avatar
    Join Date
    Jan 2012
    Location
    Sunshine Coast, QLD, AUS
    Posts
    117
    Do you need any other mods for that to fit on?

  7. #7
    mac_man_luke's Avatar
    Join Date
    Sep 2010
    Location
    South Australia
    Posts
    1,262
    +1
    22
    Iv just removed that part from my GTX, worked fine for me (other than drone at 3000rpm)

    Replacing it with a rear exhaust, mostly to clear up room in the hull.

  8. #8

    Join Date
    Oct 2007
    Location
    NC
    Posts
    107
    I'm not exactly sure on the fit but I did talk with RIVA a while back and they plan on having the '12 P-X exhaust and other goodies out soon.

  9. #9
    How much louder is it with this piece installed? I'll prolly just do the intake, exhaust section, and GPs limiter deltete. Should get it close to 75.

  10. #10
    ...Lighting The Water On Fire Since '04 duramaxxed's Avatar
    Join Date
    Jun 2008
    Location
    The Hamptons, Long Island, New York
    Posts
    790
    +1
    5
    The Exhaust will be Quite Boomy with this Installed. May be too much for some.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RIVA Free Flow Exhaust install on SHO
    By Green Hulk in forum Yamaha PWC Performance (4-stroke)
    Replies: 14
    Last Post: 05-24-2010, 08:32 AM
  2. WTB: Riva Free Flow Exhaust Kit
    By SHOdude in forum Yamaha Classifieds
    Replies: 0
    Last Post: 03-02-2009, 12:18 PM
  3. WTB RIVA Free Flow Exhaust Kit
    By cliff0413 in forum Yamaha Classifieds
    Replies: 2
    Last Post: 02-09-2009, 10:48 PM
  4. RIVA Free Flow Exhaust Kit Install Question????
    By HYNES in forum Kawasaki PWC Performance (4-stroke)
    Replies: 6
    Last Post: 03-31-2008, 07:55 PM
  5. Riva Free Flow Exhaust Kit
    By ghashimoto in forum Kawasaki PWC Performance (4-stroke)
    Replies: 20
    Last Post: 11-05-2007, 04:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •