Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: SuperCharger ID

  1. #1
    Electronics Guru Alpheus's Avatar
    Join Date
    Aug 2010
    Location
    Lake Anna Va
    Posts
    520
    +1
    1

    SuperCharger ID

    I pulled this charger off of a blown up 04 185 4-tec engine. I was told it was just rebuilt and ran for less than 20 minutes before the prop spun off and pushed the drive shaft into the engine,resulting in crank bearing damage.

    Can anyone tell if this is the updated rebuild kit by the pics???





  2. #2
    mac_man_luke's Avatar
    Join Date
    Sep 2010
    Location
    South Australia
    Posts
    1,262
    +1
    22
    Would be a fairly recent rebuild as it has the 08 style metal washers (but not the latest grey style)

    Gear looks fairly worn though

  3. #3
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    Well the housing is deff 08 and up but the clutch I am not sure the hole looks pretty small only way to tell for sure is to see if the metal washers are the same siz

  4. #4

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    show a pic of the fan side-- I am guessing an X charger w/ a MUCH used 17 tooth gear-- need pics to confirm...

  5. #5
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    That is 100% no doubt an 08+ shaft. The oil supply hole is larger to suit the 08+ updated oil jet.

    The housing also has the X hole.

  6. #6
    A smart admits!A wicked excuses!An idiot insists! mitsakosgt's Avatar
    Join Date
    Jun 2008
    Location
    GREECE ATHENS , NAXOS
    Posts
    2,691
    +1
    40
    Quote Originally Posted by jim View Post
    show a pic of the fan side-- I am guessing an X charger w/ a MUCH used 17 tooth gear-- need pics to confirm...
    Quote Originally Posted by Sayers View Post
    That is 100% no doubt an 08+ shaft. The oil supply hole is larger to suit the 08+ updated oil jet.

    The housing also has the X hole.
    +1 to Sayers!

    Take a pic from the impeller side!

  7. #7
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    Quote Originally Posted by Sayers View Post
    That is 100% no doubt an 08+ shaft. The oil supply hole is larger to suit the 08+ updated oil jet.

    The housing also has the X hole.
    It's not just an x hole they all have them 08 and up...

    We can't kow for sure it's the larger shaft till u take the washers off but I'm guessing the dealer or whoever just put a whole new sc in it

  8. #8
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by meeper View Post
    It's not just an x hole they all have them 08 and up...

    We can't kow for sure it's the larger shaft till u take the washers off but I'm guessing the dealer or whoever just put a whole new sc in it

    Didn't know they all had the hole, thanks for clearing that up.

    You can tell just by looking at the shaft it's 08+. Find a pic of a pre 08 and post it up we will easily tell the difference.

  9. #9
    Electronics Guru Alpheus's Avatar
    Join Date
    Aug 2010
    Location
    Lake Anna Va
    Posts
    520
    +1
    1
    That hole is throwing me off as well. I thought that only X-chargers had that. I do not think its an x-charger wheel. The gear is worn because I think they used the 08+ rebuild kit but it came with the 215-255 gear, so they reused the original one.


  10. #10
    pass1's Avatar
    Join Date
    Apr 2009
    Location
    Gatineau, Canada
    Posts
    423
    +1
    5
    Looks like a stock 08+( because of the oil hole in the housing) 215hp charger (because of the fan).
    I have rebuilted 07 year charger before and they also have the hole in the shaft.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SHO Supercharger Impellor ID
    By micko in forum Yamaha PWC Performance (4-stroke)
    Replies: 3
    Last Post: 02-06-2014, 12:02 AM
  2. supercharger id help
    By cliff717 in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-11-2010, 09:46 PM
  3. how to id supercharger?
    By cliff717 in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 05-11-2010, 06:32 AM
  4. Additional Shim for Supercharger Clutch
    By johnD in forum 4-Tec Performance
    Replies: 14
    Last Post: 07-24-2009, 09:55 PM
  5. SuperCharger Imp Install hours away
    By CRAZEDRXP in forum 4-Tec Performance
    Replies: 18
    Last Post: 05-06-2005, 06:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •