Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1

    Becareful Doing Business With Hopatconggpr

    I know this BECAREFUL would get your attention.

    I see Dan has gone the extra mile and invested on having some 90mm pistons for the GPR manufactured. For those of you who dont know Dan well enough, well let me tell you that him and I go way back in the Riva Forum and he has invested quite a bit of money and time testing many parts that were developed for his own platform. Dan and I have agreed and disagreed in many things, but one thing for sure based on my experience is that he is a reputable and honest person, and I never heard of anyone complain or bad mounth him because of any business deal gone sour.

    Lately many dishonest people and deals have shown up on this forum and have made people skeptical about doing business with individuals. If you are thinking about doing business with Dan, you can be certain that he will fullfill his part of the deal!!!

    Fercho
    Last edited by Fercho; 01-13-2007 at 02:16 AM.


  2. #2
    mtrager's Avatar
    Join Date
    Jul 2006
    Location
    Orlando, Florida, United States
    Posts
    2,443
    +1
    2
    Where you been Homer ?

    We miss ya.

  3. #3
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Great post Fercho.Cant wait to see the results on the 90mm MONSTER!!!!!!!!

  4. #4
    Drink My Dust's Avatar
    Join Date
    Mar 2006
    Location
    The Great State of Indiana
    Posts
    134
    Dan is "good people"............good post Nando.

  5. #5
    YudLuz2's Avatar
    Join Date
    Jun 2005
    Location
    Flowood MS
    Posts
    1,648
    +1
    112
    Quote Originally Posted by Drink My Dust View Post
    Dan is "good people"............good post Nando.

    I would agree 100%. Nothing like doing business with someone
    on just word of mouth. He sent me a set of 90mm pistons before
    I even sent him a check. I would trust him, as he has put trust in me.
    I know people will be buying these things like crazy once they see
    my triple and single pipe boat perform. I know some people have ask
    about the size and weight, everything looks good to me, and I was
    amazed to see the weight very close to what a 1200 oem piston weighs
    on a set of scales. I am ordering addition pistons now and will keep spare
    cylinders and pistons available.Thank you Dan
    Ben

  6. #6
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    Dan is very trustworthy.
    I have bought form him in the past and the item was exactly as described aas well as a smooth transaction.

  7. #7
    spud's Avatar
    Join Date
    Jul 2006
    Location
    Oceanside, California
    Posts
    1,347
    +1
    2
    Dam Hop what did you do sell someone a Shredmaster???

  8. #8
    Actually there are some people out there asking for ShredMaster's

    Salty in TX bought mine.

    Mark I have benn very busy at work. I still have them 1400 heads sitting on a bench in my garage. Hopefully tomorrow I will put them on.

    Tim did you receive my email???
    Last edited by Fercho; 01-13-2007 at 02:17 AM.

  9. #9
    spud's Avatar
    Join Date
    Jul 2006
    Location
    Oceanside, California
    Posts
    1,347
    +1
    2
    Hop is a standup Guy. He has been helpful and knowlegeable since the beginning at the Riva board in 2000. He has been around since the days of Dana and Austin (summer 2000). He definately is in the upper crust of the GPR, XL, XLT folks.

    Sometimes he has a short fuse. Makes for interesting reading though.

  10. #10
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,382
    +1
    165
    Bout time you started talking to us again..........90mm hmmmmmmm thats big. will this work w/ efi 1300 jugs ?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Do away with SC slip by building waste gate
    By mrjetskey in forum 4-Tec Performance
    Replies: 22
    Last Post: 10-28-2010, 05:28 AM
  2. You Can't Do This With An RXTiS
    By boataddict in forum Open Discussion
    Replies: 3
    Last Post: 09-12-2008, 08:32 PM
  3. Dont do bussiness with BOOSTAHOLIC.
    By ModularJunk in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-31-2008, 01:01 PM
  4. Can you do this with your engine?
    By porksword in forum Open Discussion
    Replies: 1
    Last Post: 06-28-2007, 04:52 PM
  5. Important! to the members I did business with...
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 05-08-2007, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •