Results 1 to 7 of 7

Thread: Sc slip?

  1. #1
    BAMF1500's Avatar
    Join Date
    Sep 2010
    Location
    Belleview FL
    Posts
    86

    Sc slip?

    I did a search but I'm using an app and I couldn't find what I'm looking for. I had both of my skis scers rebuilt by green hulk. My ? Is how after how many hrs should I check the slip and what is the easiest way to check it?


  2. #2
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    It all depends on the super charger and what the slip was set at.
    If its a 10-12 psi wheel you may not see much settle in slip but as you get to a 15-17 psi charger and slip is set high such as 15 to 18 ft/lbs usually you have some settle in slip change.
    Therefore on the higher boost sc it is good idea to recheck slip especially on a new setup.

    If you have OEM sc I would install and not check slip for 10-20 hours.

    The easiest way to check the slip is out of the ski obviously but it can be done in the ski.
    There should be a how too on what is needed to check slip.
    A good lower range torque wrench is needed.

  3. #3
    BAMF1500's Avatar
    Join Date
    Sep 2010
    Location
    Belleview FL
    Posts
    86
    Thanks for the info. I have 05s. How can't u tell the psi of your scer. Or is it relative to the year?

  4. #4
    BAMF1500's Avatar
    Join Date
    Sep 2010
    Location
    Belleview FL
    Posts
    86
    Yea it's an oem sc

  5. #5
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    I would not worry about checking boost on OEM charger.
    I never monitored OEM boost but I think is 7-8 psi.
    Therefore your slip would be arround 90 to 105 inch.
    How many hours since the service?

  6. #6
    BAMF1500's Avatar
    Join Date
    Sep 2010
    Location
    Belleview FL
    Posts
    86
    Probably about 15-20 hrs

  7. #7

    Join Date
    Apr 2011
    Location
    Elliott Australia
    Posts
    36
    15-20 seems a bit early for my thinking, i wouldn't worry for another 10 hours, I just checked mine after 40 hours and yes the slip was getting a bit low, so sometime before that i think, but even at 40 hours i could only just notice a slight loss in performance. I would just do it while the charger is in the ski save you messing about with them fiddely little bolts.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is it SC slipping?
    By FreakRXP1200 in forum 4-Tec Performance
    Replies: 1
    Last Post: 04-30-2009, 11:33 PM
  2. is this normal? or sc slipping? rxt-x
    By Pooper_Scooper in forum 4-Tec Performance
    Replies: 6
    Last Post: 02-28-2009, 09:47 AM
  3. SC Slip Moment?
    By aha in forum 4-Tec Performance
    Replies: 10
    Last Post: 02-26-2009, 06:07 PM
  4. RXP215 SC Slip Immediate after Riva Washer Install
    By OffShore2 in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-17-2008, 09:12 AM
  5. Stage 3 sc slip moment
    By jimjim in forum 4-Tec Performance
    Replies: 5
    Last Post: 01-15-2008, 06:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •