Results 1 to 7 of 7
  1. #1

    Jet pump and stator bad?

    I'm in the middle of my overhaul of my 95 polaris sl650. the main bearing in my PTO piston is siezed and has a whole in it. I'm going to be ordering an engine from SBT and hopefully getting this ski back on the water. My question is while i was taking the motor out I noticed the jet drive stator looked a little beat up as well as impeller. I will take a feeler gauge to it tomorrow and see if it's out of spec. I guess the previous owner ran it in shallow water alot.
    Heres some pics...




    pic of the piston. cracked and hole.


  2. #2
    urugol's Avatar
    Join Date
    Nov 2009
    Location
    Sydney, Australia
    Posts
    1,231
    +1
    3
    From the pic it looks like part of the impeller fin is broken as well, could just be the pic. I would jump on ebay and find a complete jet pump assembly in good cond you should be able to pic something up for around $150. If you are just after a stator will be much less better to do the lot in one go.

  3. #3
    LaveyT's Avatar
    Join Date
    Jul 2008
    Location
    Cincinnati
    Posts
    672
    +1
    10
    Did you find the cause for the bad motor?

  4. #4
    Quote Originally Posted by urugol View Post
    From the pic it looks like part of the impeller fin is broken as well, could just be the pic. I would jump on ebay and find a complete jet pump assembly in good cond you should be able to pic something up for around $150. If you are just after a stator will be much less better to do the lot in one go.
    I was thinking of just doing that too. but is the stator bad? I tried to get the best pics i could with it still together. I'm not sure though if its good or worn. I will shop around anyways and hopefully find one

  5. #5
    Quote Originally Posted by LaveyT View Post
    Did you find the cause for the bad motor?
    I think it could of possible sucked water. I know the carbs and the fuel pump need replacing. And the crank is out of index

  6. #6
    LaveyT's Avatar
    Join Date
    Jul 2008
    Location
    Cincinnati
    Posts
    672
    +1
    10
    http://polarispwcknowledge.shorturl.com/

    read then read some more from this link. good luck!

  7. #7
    Also my question does the stator look bad or is it still usable?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Seadoo Jet Pump and Solas Impeller 16.5x24 1996 GTX FS
    By 8 is enough in forum 2-Stroke Performance
    Replies: 0
    Last Post: 03-22-2012, 09:37 PM
  2. FS seadoo RXP jet pump and nozzle/reverse assembly off a 04
    By RXPSTUNNA in forum Sea Doo Classifieds
    Replies: 9
    Last Post: 10-14-2010, 01:58 PM
  3. Pics of removed jet pump/and help
    By absolutesltx in forum Polaris Open Discussion
    Replies: 8
    Last Post: 06-10-2010, 12:16 PM
  4. Running rough after jet pump and carb. removal
    By sebas54 in forum Polaris How To & FAQs
    Replies: 17
    Last Post: 05-12-2010, 07:03 PM
  5. WTB jet pump and impeller for 650sx
    By billy's gpr in forum Kawasaki Classifieds
    Replies: 1
    Last Post: 09-03-2008, 07:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •