Results 1 to 2 of 2
  1. #1
    BlueFishCrisis's Avatar
    Join Date
    Aug 2011
    Medina, Ohio, United States

    780 Carbs / Intake Mounting

    Does anyone know if there was a rationale for the different mounting of the carbs on 780 models i.e. with the trottle on the PTO end and the carbs turned 180 degrees so the diaphragms face the jugs? I have noticed that the intake for the 780 vs the 750 raises the carbs by about 1/2" as the top flange is thicker than the 750s........????


  2. #2
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Cleveland OH
    Having the return fitting on the MAG cyl helps trapped air to escape more easily. Since the ski nose raises up upon accel, it would have to be forced down, then eventually up and back to the tank when exiting at the PTO.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 780 Carbs & Intake
    By BlueFishCrisis in forum Polaris Open Discussion
    Replies: 3
    Last Post: 03-01-2012, 05:16 PM
  2. WTB 785 Rave Valve, Head,Pipe, Intake to carbs,Carbs
    By xpl2008 in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 03-12-2011, 02:11 AM
  3. Ocean Pro 780 Carbs on my 96 SLT 780 and reed spacers
    By kegonsa in forum Polaris PWC Performance
    Replies: 21
    Last Post: 10-15-2010, 11:55 AM
  4. slx780 same carb with sl 780? all 780 same carbs?
    By andy95'slx780 in forum Polaris Open Discussion
    Replies: 4
    Last Post: 07-31-2010, 12:09 PM
  5. 780 mounting rails vs. engine mount plate
    By xlint89 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 02-18-2007, 06:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts