Results 1 to 6 of 6
  1. #1

    Join Date
    Aug 2006
    Location
    Indiana
    Posts
    1,274
    +1
    81

    Sealer for between pump sections?

    I have always used Yamabond 4 to seal between sections of the pump and nozzle. It appears to be obsolete, what does everybody else use? I thought it might be too much pressure for just RTV.
    Thanks,


  2. #2
    Quote Originally Posted by LT1GMC View Post
    I have always used Yamabond 4 to seal between sections of the pump and nozzle. It appears to be obsolete, what does everybody else use? I thought it might be too much pressure for just RTV.
    Thanks,
    this is subject to opinion...
    I have been using 1211 between the wear ring and pump, and between the pump and nozzle. I have also used Black, Grey RTV, and GE Clear as well with good results.
    Some don`t use any sealer between the pump and nozzle bc of testing back to back different nozzles or they say its not even necc.
    The important location is between the pump and wear ring...
    For what it`s worth, I`ve always sealed both joints... Yamaha did...

  3. #3
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    Hondabond 4 is the same thing and easier to find

  4. #4
    Yamaha artisan Cutlass's Avatar
    Join Date
    Oct 2010
    Location
    Madison, WI, USA
    Posts
    2,500
    +1
    55
    I've also used 1211.I've also tried red anaerobic gasket maker

  5. #5
    ^ I like the red anerobic for the pump cones on the yami and seapoo pumps.

  6. #6
    "just sayin".. jetdave56's Avatar
    Join Date
    Nov 2008
    Location
    JERSEY SHORE
    Posts
    4,500
    +1
    619
    Always used a light coat of permatex RTV black between pump and nozzle...a little propane around mating surfaces always loosened her up if changing out a prop...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What sealer for Transom plate to pump?
    By LT1GMC in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 03-18-2007, 01:58 PM
  2. Sealer for pump
    By gerhand44 in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 10-11-2006, 02:34 PM
  3. thank you for the kawi section.
    By john zigler in forum Kawasaki PWC Performance (4-stroke)
    Replies: 4
    Last Post: 09-03-2006, 05:59 PM
  4. T'ing into existing line for bilge pump?
    By MPower in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 05-22-2006, 10:49 PM
  5. Parts list for RXT pump conversion for GTX?
    By 01xdime in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-19-2005, 09:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •