Thread: Reed stuffers install help
04-08-2012, 06:25 PM #1
Reed stuffers install help
If anyone could share some insight on rreed stuffer installation that would be great, as I have no idea what I'm doing here. What all do I need to remove?
04-09-2012, 07:09 AM #2
here's what you need to get to...remove out of the way #15 air box cover ,#16 air box, the throttle body, loosen clamps #5, #1 throttle plate intakes ,#4 gasket should be replaced with new one, #2 spacer plate,#3 balance plate,# 12 are your reed cages..that's where their installed...
04-09-2012, 01:03 PM #3
04-09-2012, 01:11 PM #4
04-09-2012, 02:53 PM #5
Whole exhaust system is out,
Front air intake tube is out. Still seems like its gonna be a pia to get out?
04-09-2012, 03:17 PM #6
04-09-2012, 05:10 PM #7
Got em in! Not nearly as hard as I was making it out to be. Took the whole air box/throttle bodies off together, and that cleared it all up, plenty of room.
Thanks a lot!
04-14-2012, 06:41 PM #8
- Join Date
- Oct 2011
- aurora IL
notice a difference between OEM and aftermarket
04-14-2012, 08:13 PM #9
Don't have it all back together yet, exhaust is still out while I'm doin the pump tunnel re enforcement/jet works mod. Will report back in a week or so
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Jaym24 in forum 2-Stroke PerformanceReplies: 4Last Post: 06-14-2011, 02:05 AM
By chvscks319 in forum Polaris How To & FAQsReplies: 6Last Post: 07-24-2009, 10:58 AM
By rxpsalonika in forum 4-Tec PerformanceReplies: 1Last Post: 05-07-2009, 11:24 AM
By vidbuster in forum 4-Tec PerformanceReplies: 5Last Post: 03-25-2009, 11:05 PM
By gotpurp305 in forum 4-Tec PerformanceReplies: 4Last Post: 02-13-2008, 10:33 PM