Page 1 of 8 1 2 3 ... LastLast
Results 1 to 10 of 72
  1. #1

    Parting out a 2004 Kawasaki STX-12F Everything good except cylinder and head.

    I picked up this ski just for the trailer and possibly a project but the ski needed more work than I anticipated so I decided to part it out. It came with the engine disassembled and possibly incomplete so I feel it's much better to sell it in parts than to try to piece it back together and pass it off to somebody else.

    I have pics of everything so don't be afraid to ask. All prices do not include shipping but I will use USPS flat rate boxes whenever possible.
    Rather than posting tons of pics in the thread, i'll start with a link to my Mediafire account;

    YOU CAN SEE PICS OF EVERYTHING IF YOU FOLLOW THIS LINK;http://www.mediafire.com/?nvexv07ip6a7g

    All parts are O.B.O. so don't be afraid to correct me on any prices. I have owned countless skis over the years but this is my first 4-stroke.

    I have the Hull with Title for $500 if anyone is interested but I warn you now, I like a clean yard and it will go to the dump if it sits here for more than a couple more weeks. HIN#KAW41680B404 - Too Late, gone to the dump -


    Flywheel (21007-3731) $75
    Drive coupler set w/Damper (42034-3711 & 92161-3711) $35
    Driveshaft (39159-3739) $100
    Midshaft Housing (13280-3756) $75
    Hood Skin (14091-3753-VK) $75
    Steering tower Cover where gauges mount. (14091-3770-VK) $65
    Filler cap and neck (51049-0712 & 59231-3734) $10
    Start Stop assembly with lanyard (13151-3722 & 92072-3809) $65
    Glovebox and cover (39012-3735 & 14091-3710-8C) $35
    Sponsons (59437-3733-6Z & 59437-3734-6Z) $45
    Boarding Step - (Foam is dry and flaking but replaceable) (34027-3710) $40
    Oil catch Tank (52001-3738 ) $15
    Oil Cooler (14091-3755 & 14091-3756 & 39067-3707) $15
    Case Breather (32099-3848 & 14091-3761) $35
    Crankshaft (13031-3740) $250
    Cylinder - for core only (11005-3758 ) $150
    Cams with gears $125
    Output Cover (14091-3776) $20
    Stator Cover (14031-3734) $40
    Intake Mani (59076-3731) $100
    Exhaust Mani (59081-3741) $100
    Muffler 1 (49070-3744) $100
    Muffler 2 (49070-3745) $75
    Head - bare for core - can include all hardware as well but condition unknown (11008-3705) $200
    Motor Mount $80/set with 3 shims and hardware
    Throttle Body assembly (16163-3708 ) $125
    Starter $70 - Sold -
    Bendix $50 - Sold -
    Stator $150 - Sold -
    Crank Pickup with cover - SOLD -
    ECM - SOLD -
    Coils with wires $45 each or both for $75 - Sold -
    Rectifier $25 - Sold -
    Fuel Rail w/Injectors $125 - Sold -
    Digital display - Trashed -
    Fuel Pump Assembly - SOLD -
    Mirrors $25 - SOLD -
    Throttle lever - SOLD -
    Throttle Cable - SOLD -
    Seat cover $45 - SOLD -
    Wiring Harness - Recycled -
    Engine Cases $350 - SOLD -
    Handlebar cover/pad (39087-3727-6Z) $15 - Sold -
    Composite Side panels (14091-3708-8C & 14091-3709-8C )$15 each - Sold -
    Fuel Level Sensor (27010-3770) $30 - Sold -
    Connecting Rods (13251-3701-LL) - SOLD -


    * I have all the sensors as well but am not sure what they are worth so just ask if you need something. - Sold -
    Last edited by OCD Solutions; 07-28-2012 at 09:32 PM.


  2. #2
    Sierra8's Avatar
    Join Date
    Sep 2008
    Location
    Raritan Bay, NJ
    Posts
    173
    +1
    7
    Dibs on seat cover, PM sent.

  3. #3
    Quote Originally Posted by Sierra8 View Post
    Dibs on seat cover, PM sent.
    Got you covered, (pun intended).

  4. #4

  5. #5

  6. #6
    Took the hull to dump today. I didn't want to mess with the titling and registering it so I sent in a disposal form and skidded it into a dumpster.

    I got the seat cover removed and all the footwell turf. Two pieces are already spoken for but if anybody needs any random pieces for repairs, just let me know.

  7. #7
    cconigliaro's Avatar
    Join Date
    Oct 2011
    Location
    Boca Raton, FL
    Posts
    177
    I need a pump shoe. Please tell me it didn't get scrapped. Thanks

  8. #8
    Okay I won't tell you then. :biggrin:

    Sorry, i even looked at this morning and wondered if I should pull it but decided against it.

  9. #9
    I am interested in the display. Do you know if it works?

  10. #10
    Quote Originally Posted by imacheermom View Post
    I am interested in the display. Do you know if it works?
    There is some weird coloration, (almost like burn-in) between the lenses but I have seen it on other units as well so it could be the way they are. I will power it up today and post a pic.

Page 1 of 8 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts Parting out (2) 2001 Kawasaki STX 1100 DI Jetskis NEW HAMPSHIRE
    By crzyjetskr in forum Kawasaki Classifieds
    Replies: 7
    Last Post: 07-09-2013, 09:41 AM
  2. 2004 Kawasaki STX-12f Hood Touch Up Paint
    By msabtello in forum Kawasaki How To & FAQs
    Replies: 2
    Last Post: 09-05-2011, 05:15 PM
  3. FS Parting out a 2004 Kawasaki 15F
    By mirror in forum Kawasaki Classifieds
    Replies: 51
    Last Post: 04-16-2011, 08:12 AM
  4. WTB Fuel Injector Kawasaki STX-12F 2004
    By onefastgpr619 in forum Kawasaki Classifieds
    Replies: 2
    Last Post: 09-08-2010, 02:59 PM
  5. WTB kawasaki stx 12f parts
    By Vagaondracing103 in forum Kawasaki Classifieds
    Replies: 1
    Last Post: 03-31-2010, 09:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •