04-12-2012, 03:19 PM #1
- Join Date
- Aug 2007
2012 rxp-x cooling water to exhuast and intercooler RESTRICTED by FACTORY
Okay guys i am changing my prop to 15/20R and i noticed a water cooling restricter washer that definitely restricts water to the intercooler and exhuast.
I bet if i widened up this washer hole i would get better cooling for my intercooler....but would this cool the exhaust too much?
I could always put a restricter on the exhaust side to limit flow and let the FULL cool water flow to the intercooler.
I bet this is almost like increasing the intercooler size due to more flow!
04-12-2012, 03:52 PM #2
- Join Date
- Jul 2007
- Montgomery, AL
You will have too much water and flood your water box at idle. On the RXP's when converting to an external IC you can drill the washer out a bit. The RXP-x's already have a larger restriction washer than a RXP.
04-12-2012, 05:02 PM #3
I would leave it alone as if you make it bigger or widen it it could possibly cause your IC to leak do to the increased pressure....
04-12-2012, 05:09 PM #4
Dont do it!!!!!!!!!!! Youll watch that pretty intercooler puff right up!!
04-12-2012, 05:18 PM #5
+1 to all the above.... The Green restricter is the biggest one.. and the yellow is the smallest.. no need to change it.
04-13-2012, 09:01 AM #6
Did someone drill it a bit...
Im asking because im already using a T to take water to the Watercooled SC and i already upgrade the IC...
I want to know how much i could drill it to have the same pressure as it was OEM with this aditionals...
04-13-2012, 11:15 AM #7
04-13-2012, 06:26 PM #8
smaller hole more psi bigger hole less psi more volume
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Martin RXT-X in forum 4-Tec PerformanceReplies: 4Last Post: 03-29-2012, 03:13 PM
By JoeyDFZS in forum Yamaha ClassifiedsReplies: 5Last Post: 12-01-2011, 04:45 AM
By trofodotiki in forum 4-Tec PerformanceReplies: 13Last Post: 05-17-2011, 08:32 AM
By YamahaPat in forum Yamaha ClassifiedsReplies: 30Last Post: 12-02-2009, 09:54 AM
By ModularJunk in forum Sea Doo ClassifiedsReplies: 11Last Post: 09-04-2009, 07:58 PM