Results 1 to 8 of 8
  1. #1

    Which key to buy for ZXI ?

    So I need a key for a 750 ZXI and have no clue which to buy. The website shows like 19 different keys all lettered so how do I figure out what letter key I need??


  2. #2
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    5,011
    +1
    283
    If you don't currently have a key, you'll have to look at the back side of the switch and get the 4-digit number.

  3. #3
    And how do I decipher this 4 digit number?

  4. #4
    Somewhere on the switch it has the key code on it and you just need to buy the matching key. If you dont really care about having a key you can just take the switch apart and pull the magnets out of it and put it back together. Then it wont require a key, just turn it with your fingers.

  5. #5
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    5,011
    +1
    283
    The 4-digit code will start with 30, such as 3004 or 3016.

  6. #6
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    6,523
    +1
    1,269
    Quote Originally Posted by SlurpJ View Post
    And how do I decipher this 4 digit number?
    the 4 digit code coincides with the part number for the key..when you order a key you'll find that info on the parts diagram. I do not suggest taking the switch apart. They key is about $25

  7. #7
    OK so dumb question, been working on the trim so haven't really looked to hard but how do I take the front pieces off to get to the ignition??

  8. #8
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    6,523
    +1
    1,269
    Quote Originally Posted by SlurpJ View Post
    OK so dumb question, been working on the trim so haven't really looked to hard but how do I take the front pieces off to get to the ignition??
    not sure on a specific model, but for the couple of times I've had to pull the switch to get the number off it I got in the habit of recording key # in customer records so I wouldn't have to deal with it that much.

    in plain terms..what a PITA that was.

    I snaked my arm inside with some wide nose pliers and was able to spin the nut off. they didn;t make it wasy..for the obvious reason.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEED ADVICE on which Jet Ski to buy for the Family !
    By joeman in forum Yamaha Open Discussion
    Replies: 14
    Last Post: 03-07-2010, 08:44 PM
  2. Which anchor to buy for my SHO on the ocean?
    By mlbfan86 in forum Yamaha Open Discussion
    Replies: 0
    Last Post: 05-30-2008, 08:09 AM
  3. JERRY - Need SC parts to buy for rebuild!!
    By camar0 in forum 4-Tec Performance
    Replies: 27
    Last Post: 04-14-2007, 07:18 PM
  4. Which PWC TO BUY?
    By kaw250hp in forum 4-Tec Performance
    Replies: 27
    Last Post: 03-15-2007, 11:50 PM
  5. Which Pwc TO Buy
    By kaw250hp in forum Kawasaki PWC Performance (4-stroke)
    Replies: 5
    Last Post: 02-28-2007, 09:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •