Results 1 to 3 of 3

Thread: need help

  1. #1

    Join Date
    Mar 2008
    Location
    saskatchewan
    Posts
    152

    need help

    i am trying to get at my intake -reeds on 1300efi 04 and am wondering if i need to remove my whole exhaust pipe or is it possible to remove rear sec. i tried searching could not find


  2. #2

    Join Date
    Aug 2006
    Location
    Indiana
    Posts
    1,274
    +1
    81
    It actually is much easier to take the front pipe off to gain proper access. Its pretty hard to see the front of the oil pump to correctly align the linkage when reassembling the carb rack/throttle bodies, plus not sure about the FI, but on the carb models its hard to get the air cleaner front/bottom latch off.
    The front pipe only has 1 gasket with 4 bolts, a couple of water lines, and the 2 mount bolts.

  3. #3

    Join Date
    Mar 2008
    Location
    saskatchewan
    Posts
    152

    ya you right

    Quote Originally Posted by LT1GMC View Post
    It actually is much easier to take the front pipe off to gain proper access. Its pretty hard to see the front of the oil pump to correctly align the linkage when reassembling the carb rack/throttle bodies, plus not sure about the FI, but on the carb models its hard to get the air cleaner front/bottom latch off.
    The front pipe only has 1 gasket with 4 bolts, a couple of water lines, and the 2 mount bolts.
    i am gonna take whole pipe off as it will b easier to get at front of intake i have to put this together right this time.i am gonna try and pressure test it when done doing intake it will b a first.i dont want too take apart just wanna ride

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. new 05 RXT NEED HELP
    By RXPNJ in forum 4-Tec Performance
    Replies: 12
    Last Post: 07-03-2009, 12:16 PM
  2. NEED HELP URGENT(HULK) RXP DOWN
    By macattack in forum 4-Tec Performance
    Replies: 28
    Last Post: 11-22-2005, 02:39 PM
  3. My 2 RXP's need HELP!
    By Tube Master in forum 4-Tec Performance
    Replies: 21
    Last Post: 07-19-2005, 09:44 PM
  4. I need help remove stock intercooler
    By orc in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-13-2005, 04:08 PM
  5. NEED HELP!!!!!
    By MartyRXP in forum 4-Tec Performance
    Replies: 11
    Last Post: 05-10-2005, 08:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •