Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23
  1. #1

    Join Date
    Apr 2012
    Location
    Gold Coast, Queensland, Australia
    Posts
    12

    Good setup for FZR to go 77- 82mph??

    Hey guys had my FZR for almost a year now. love it but just looking for better acceleration and more topspeed

    i currently have:
    riva exhaust
    ribbon removal
    riva air intaker
    R&D intake grate "not stainless steel"
    pump seal kit
    oil breather upgrade


    i was thinking of getting
    i/c by gary watson with bov or just upgrading the cooling of the stock i/c and buying a bov??
    either a b1 or engine tec 11-12psi wheel or c3 s/c wheel
    riva or R&D fuel pressure regulator ( is the riva worth 2 times the money??)
    skat prop (maybe a dual prop or are they only for acceleration??)
    flash or i can get a riva vipec ecu for $950 new
    s/c gear dampener and shaft upgrade.

    anything else i need?? wat speeds and acceleration could i expect
    or better yet wat setup do ppl have to get to 77 80mph??

    thanks guys


  2. #2
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    I run 77 with a vtech stage 2 and a c1 wheel and a repitched prop, stock intercooler and ride plate

  3. #3
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3
    This would be a VERY nice set-up

    i/c by gary watson with bov
    engine tec low boost wheel (typically ends up around 13 - 14 psi)
    riva fuel pressure regulator (quick buy the used one on the forum, it is a better set-up, but no it is not worth twice the price)
    skat twin prop (a couple on ebay right now) great acceleration, will lose 1-2 mph on top
    riva vipec ecu for $950 new
    s/c gear dampener and shaft upgrade.

    anything else i need?

    get a stock OEM VX110 rideplate
    tach
    wideband Air/Fuel gauge

    Great acceleration

    With twin, 80 to 81
    With Concord or Dynafly, 82 to 83

  4. #4
    hdlefler's Avatar
    Join Date
    Aug 2010
    Location
    Wesley Chapel, Fl
    Posts
    911
    +1
    100
    Quote Originally Posted by brooko View Post
    Hey guys had my FZR for almost a year now. love it but just looking for better acceleration and more topspeed

    i currently have:
    riva exhaust
    ribbon removal
    riva air intaker
    R&D intake grate "not stainless steel"
    pump seal kit
    oil breather upgrade


    i was thinking of getting
    i/c by gary watson with bov or just upgrading the cooling of the stock i/c and buying a bov??
    either a b1 or engine tec 11-12psi wheel or c3 s/c wheel
    riva or R&D fuel pressure regulator ( is the riva worth 2 times the money??)
    skat prop (maybe a dual prop or are they only for acceleration??)
    flash or i can get a riva vipec ecu for $950 new
    s/c gear dampener and shaft upgrade.

    anything else i need?? wat speeds and acceleration could i expect
    or better yet wat setup do ppl have to get to 77 80mph??

    thanks guys
    To get the best performance out of your combination get an aftermarket intercooler. You can run 77 - 78+ with a reflash, repitched stock prop and after market intercooler.Add a wheel, regulator, after market prop and your at 80 +

  5. #5

    Join Date
    Apr 2012
    Location
    Gold Coast, Queensland, Australia
    Posts
    12
    what r the main differances between motec and rica vipec? and can you get a gps for vipec???

  6. #6
    Carbonic's Avatar
    Join Date
    Sep 2011
    Location
    Omaha, Nebraska
    Posts
    448
    +1
    32
    Where is this $950 Vipec? Last I seen they were like 3k+

  7. #7
    Quote Originally Posted by Carbonic View Post
    Where is this $950 Vipec? Last I seen they were like 3k+
    yes please where are they i want one vipec for 950$

  8. #8
    mike1706's Avatar
    Join Date
    Dec 2008
    Location
    ,Florida
    Posts
    1,691
    +1
    16
    Quote Originally Posted by jorge82 View Post
    yes please where are they i want one vipec for 950$
    me too, i want one

  9. #9
    fx160's Avatar
    Join Date
    Nov 2005
    Location
    gold coast australia
    Posts
    2,409
    +1
    193
    Quote Originally Posted by brooko View Post
    Hey guys had my FZR for almost a year now. love it but just looking for better acceleration and more topspeed

    i currently have:
    riva exhaust
    ribbon removal
    riva air intaker
    R&D intake grate "not stainless steel"
    pump seal kit
    oil breather upgrade


    i was thinking of getting
    i/c by gary watson with bov or just upgrading the cooling of the stock i/c and buying a bov??
    either a b1 or engine tec 11-12psi wheel or c3 s/c wheel
    riva or R&D fuel pressure regulator ( is the riva worth 2 times the money??)
    skat prop (maybe a dual prop or are they only for acceleration??)
    flash or i can get a riva vipec ecu for $950 new
    s/c gear dampener and shaft upgrade.

    anything else i need?? wat speeds and acceleration could i expect
    or better yet wat setup do ppl have to get to 77 80mph??

    thanks guys
    add watson intercooler and engine cooling ETlow boost scat 13/23 prop
    dampner and shaft for reliability
    presure regulator if going reflash
    probably don't need it if going vipec
    make sure you can get the tune done on the vipec local
    add a vx plate (pre 200 or a vxr plate new, the vxr plate is the same as the old vx plate , the new vx plate is slower

  10. #10
    RichieFZR's Avatar
    Join Date
    Jan 2010
    Location
    Gold Coast, Queensland, Australia
    Posts
    2,093
    +1
    4
    Cooler , Et wheel , 13/24 0r 25 prop , VX ride plate , Vtech Stage 3 reflash (GCWR) , fuel reg you'll be over 80mph.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sbc Good engine or not, if not where to go???
    By gvnitup in forum Polaris Open Discussion
    Replies: 17
    Last Post: 04-22-2007, 09:03 AM
  2. Good rough water setup for RXP???
    By RXP-REX in forum Sea Doo Open Discussion
    Replies: 24
    Last Post: 03-02-2007, 10:05 PM
  3. For whoever is going to the World Finals...
    By Turbo-Spun in forum Open Discussion
    Replies: 10
    Last Post: 09-15-2006, 05:44 PM
  4. finally got a chance to go for a ride this weekend
    By mxl16 in forum 4-Tec Performance
    Replies: 1
    Last Post: 04-01-2006, 07:22 PM
  5. What's the good pump setup for a stock 03 GTX-SC?
    By Jarrett in forum 4-Tec Performance
    Replies: 10
    Last Post: 07-15-2005, 05:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •