Results 1 to 3 of 3
  1. #1
    Suthrn's Avatar
    Join Date
    Jul 2006
    Location
    Delaware
    Posts
    318

    2005-07 d-plate and overheat warning?

    Just to get this straight in my head. If I install the dplate on my ski(2006) I should not buy the plug from riva just leave everything as is? I also read where someone installed a 10ohm resistor in and it was fine. Just wanting to get the definitive answer before I start this little project. I did a search but from my readings I don't feel as if I came to an ultimate conclusion. Thanks for any help.


  2. #2
    SpeedJunky's Avatar
    Join Date
    Dec 2005
    Location
    Michigan
    Posts
    1,118
    +1
    35
    2006 you want to use a 10,000 ohm resistor. I have 2 2005's with the 10k ohm resistors and all is well.

  3. #3
    Banned User
    Join Date
    Nov 2006
    Posts
    121
    Quote Originally Posted by Suthrn View Post
    Just to get this straight in my head. If I install the dplate on my ski(2006) I should not buy the plug from riva just leave everything as is? I also read where someone installed a 10ohm resistor in and it was fine. Just wanting to get the definitive answer before I start this little project. I did a search but from my readings I don't feel as if I came to an ultimate conclusion. Thanks for any help.
    i have 06 gp13oor just put the d plate and your done i had mine all summer no probloms at all u dont need the plug 06-07
    mike

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FX CRUISER (2005) over heat indication and warning beep (bad bilge???)
    By Nuts4coke in forum Yamaha PWC Performance (4-stroke)
    Replies: 7
    Last Post: 05-16-2016, 04:08 PM
  2. 01 GPR with D-Plate and Chip, Exhaust Temp Warning Came On
    By smoofers in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 06-02-2014, 08:36 PM
  3. 07 250x w/ TBM timing advance, R&D plate, and 12/20 impeller
    By krokus in forum Kawasaki PWC Performance (4-stroke)
    Replies: 0
    Last Post: 03-19-2012, 03:05 PM
  4. 05 GP1300R D-Plate and Annoying Overheat Alarm
    By gwsjr in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 08-11-2007, 05:53 AM
  5. OPAS BLOCK OFF PLATES AND OTHER ??
    By RXPNJ in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-10-2005, 07:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •