Thread: GPR head bolts
05-05-2012, 09:20 PM #1
GPR head bolts
I snapped a head bolt on my GPR. Anybody have any of the short bolts laying around?
2nd time this has happened to me.
I've been using 16,16,25 ft lbs on the torque specs. Should you replace the bolts every couple times you have the head off?
05-06-2012, 08:04 AM #2
ive got some mike. i always torque the head bolts in two steps. 20 / 25 final.
measure the length of the bolts. you should be able to see if the bolt stretch,look in between the treads.you will see fine cracks.
let me know how many you will need.
05-06-2012, 11:22 AM #3
05-06-2012, 11:34 AM #4
Should you replace the bolts every couple times you have the head off? NO......Mike those are stainless bolts, they just don't break........anyways I have what you need, no charge, send me your address in a pm and I'll send these out tomorrow.........
05-06-2012, 11:39 AM #5
05-06-2012, 12:06 PM #6
I got what I need from Peteshauling. Thanks Frank
05-06-2012, 07:07 PM #7
05-06-2012, 09:36 PM #8
- Join Date
- May 2006
Sounds like u need a new tourq wrench at least ck it with another one or something
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)