Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1

    Join Date
    Jul 2005
    Location
    Central North Carolina
    Posts
    3,847
    +1
    528

    Cool R&D to release new Jet pump for sho/fz

    R&D Pro Series 160mm 14 Vein Stainless Steel Racing Pump Kit

    R&D has developed “The Ultimate Racing Pump” for the Big Powered Yamaha’s. When it comes to racing pumps for the Yamaha, it absolutely does not get any better. This new R&D 14 Vein Racing Pump System will tame up to 500 H.P. engine packages with NO PROBLEMS! The Pump utilizes a 160mm impellor O.D., while upsizing the internal hub to 83mm. The Pump System assembly also uses and extended driveshaft set up which will relocate the vein section creating a shorter stator vein section. Shorter stator vein sections with large hubs also referred to as a axial flow design will build big pressure which will add to greater pump thrusts over conventional mixed flow pump systems. R&D has also incorporated into the new design a “Full Length Liner”. Gone is the old school split liner setup where the impellor is placed and rides between two liner surfaces. The new R&D design does it right, and the way a Race Pump should be! The R&D Race Pump works seamless with existing R&D 160mm Single Stage or Twin Prop Impellor set ups. Prop sold separately. Simply put, there is no better pump system available.

    • Produces maximum thrusts, eliminates internal pump cavitation
    • Significantly increases pump load and hook up over any other pump design
    • Increases acceleration performance
    • Higher top speed averages
    • Works great with stock reduction nozzles, or R&D Pro Nozzles
    • Works great with R&D Adjustable Pump Cone Assemblies

    Pt# 132-22000 Call for availability


  2. #2
    Kristian Keppel Waterholics's Avatar
    Join Date
    Apr 2010
    Location
    Trinidad & Tobago
    Posts
    1,405
    +1
    38
    I really can't wait. When is this going to be available.

  3. #3
    Whats that whistling noise? jtskier11's Avatar
    Join Date
    Sep 2007
    Location
    Right side of Kansas
    Posts
    4,342
    +1
    87
    Sounds nice. I see dollar signs!!!!!!!

  4. #4
    Picture
    And coast ;p

  5. #5
    mjh3ides's Avatar
    Join Date
    Jul 2007
    Location
    Jupiter, Florida
    Posts
    6,805
    +1
    2,024
    Interesting. I like the idea of using an extended liner so the back of the prop isn't turning inside the stator housing, like with the setback Skat pumps. If anyone gets a quote let us know. I'd like to know how it compares in price to the Skat & Rotax pumps.

  6. #6
    stangbang's Avatar
    Join Date
    Oct 2007
    Location
    West Palm Beach
    Posts
    844
    +1
    129
    Whatever the cost is, it will be worth it. I fear running into high powered yami's with this pump.

  7. #7
    Kristian Keppel Waterholics's Avatar
    Join Date
    Apr 2010
    Location
    Trinidad & Tobago
    Posts
    1,405
    +1
    38
    Is SKAT making this pump for R&D ?

  8. #8
    hitman's Avatar
    Join Date
    Aug 2006
    Location
    Ft. Lauderdale, FL
    Posts
    4,328
    +1
    12
    Quote Originally Posted by Waterholics View Post
    Is SKAT making this pump for R&D ?
    I talked to Glenn the other day to get you the answer to this question.

    This pump is completely R&D. They went back to the drawing board on this one, did a redesign, and are producing the whole thing. No Skat involvement as far as I know.

  9. #9
    Kristian Keppel Waterholics's Avatar
    Join Date
    Apr 2010
    Location
    Trinidad & Tobago
    Posts
    1,405
    +1
    38
    Quote Originally Posted by hitman View Post
    I talked to Glenn the other day to get you the answer to this question.

    This pump is completely R&D. They went back to the drawing board on this one, did a redesign, and are producing the whole thing. No Skat involvement as far as I know.
    Well that's good news. Iv'e heard that SKAT had a lot of problems with bearings such.

  10. #10
    hitman's Avatar
    Join Date
    Aug 2006
    Location
    Ft. Lauderdale, FL
    Posts
    4,328
    +1
    12
    I'm sure this pump wil be the ultimate in hookup and out perform the Skat equivilant. If not, there would be no point in them going through the trouble to produce it.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. I need a new jet pump for my 08 Ultra 250X "options" ?
    By JETFX in forum Kawasaki PWC Performance (4-stroke)
    Replies: 5
    Last Post: 02-25-2011, 05:39 AM
  2. at 100 hour service, how to repack the jet pump with grease?
    By jerseyshore in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 06-15-2010, 06:46 PM
  3. Riva to release new intake grate (stainless) and ride plate for FZ skis.
    By Green Hulk in forum Yamaha PWC Performance (4-stroke)
    Replies: 24
    Last Post: 06-04-2010, 12:55 PM
  4. Want to optimize our jet pumps?
    By engineermike in forum 4-Tec Performance
    Replies: 31
    Last Post: 06-22-2009, 09:46 PM
  5. Help to Identify a jet Pump!
    By ZMANN in forum Polaris PWC Performance
    Replies: 10
    Last Post: 10-22-2006, 12:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •