Results 1 to 9 of 9
  1. #1

    Join Date
    Jun 2009
    Location
    Tucson AZ
    Posts
    8

    99 XPL gauges dont work no beep from DESS

    So I was riding my ski when it died on the water got it back found the 15a fuse for charging system blown and replaced it. I now have nothing from the insturment panel and no crank or beeps from the DESS. I checked the battery its fine tested the power wire where it comes into the power block at the front of the ski and I have power there but I dont seem to have power Insturment panel. Is there another fuse box besides the one on the MPEM? What wire is the supply voltage for the MPEM to test? What other things can I test to see whats wrong. ANy advice is much apriciated thanks.


  2. #2

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    bendix shorted out your stator.

  3. #3

    Join Date
    Jun 2009
    Location
    Tucson AZ
    Posts
    8
    It wasnt the bendix actually was a tooth from the starter but that doesnt explain the lack of power to the Insurment panel.

  4. #4

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    So you are saying that your ski still runs, but you gauges and beeper do not work?

  5. #5

    Join Date
    Jun 2009
    Location
    Tucson AZ
    Posts
    8
    No it doesnt start at al wont recognize the key no power to insturment panel no beeps even if you hit the start 5 times also the gauges dont move when you hit start. Wont crank.

  6. #6

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    Your stator is shorted out w/ metal from your bendix 1 of 2 of your 15 amp fuses has blown-- there is 1 in your mpem and 1 in your front electrical box. Fix your part that is shorting your stator out, replace or fix your stator and replace your fuses.

    OR your mpem is shorted out, but that is unlikely.

  7. #7

    Join Date
    Jun 2009
    Location
    Tucson AZ
    Posts
    8
    So there is supposed to be fuses in the box with the starter sylinoid and coils too? I couldn't find another fuse any where.

  8. #8

    Join Date
    Mar 2006
    Posts
    1,831
    +1
    119
    yes, follow the small red wire from the starter relay to the fues holder.

  9. #9

    Join Date
    Jun 2009
    Location
    Tucson AZ
    Posts
    8
    cool thanks man I will try and find that today

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 20
    Last Post: 03-27-2016, 02:46 PM
  2. Replies: 1
    Last Post: 03-12-2013, 05:21 PM
  3. xp gauges not working no lanyard chirp
    By skizzle87 in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 06-05-2012, 07:59 AM
  4. FS 99 xpl gauges, oil pump, choke cable
    By rxp127 in forum Sea Doo Classifieds
    Replies: 13
    Last Post: 02-22-2010, 01:02 AM
  5. no beep from MPEM - Only a buzz
    By mrbtd in forum 4-Tec Performance
    Replies: 16
    Last Post: 11-25-2008, 08:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •